Large Buildings & Industrial Cellular Signal Boosters
STOP DROPPED CALLS. IMPROVE CALL QUALITY.
Get cell and data signals up to 32x stronger, and enjoy more bars in your home, office, or vehicle.
Mobile
Cel-Fi QUATRA 1000 (CU) Coverage Unit 100dB Gain for Band 2/4/5/12
100dB Gain for Band 2/4/5/12
Cel-Fi Quatra 1000
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague occupants in middleprise buildings. Cel-Fi QUATRA is an Active DAS Hybrid that solves this problem. It is an affordable, all-digital solution. It provides uniform, high quality cellular signal throughout a building, and is scalable to the size needed. Cel-FI QUATRA is carrier approved and guaranteed network safe. Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger, utilizing CAT 5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. Cel-Fi QUATRA can be installed in just days (compared to months typical of other solutions), and at a price point that meets the middleprise budget.
Description
Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
- Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
- Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
- Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
- Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
- Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
- All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
- Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
- Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
- Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
Cel-Fi WAVE Portal
- Cel-Fi device and asset management
- Data modeling and reporting
- Mobile and computer applications
- Globally trusted carrier-grade security
- Users can access the Cel-Fi WAVE Platform portal through the dashboard interface, or integrate it via APIs.
Request Portal Access: https://cel-fi.com/account-request/
Additional information
| Manufacturer |
|---|
Related products
Cel-Fi GO XD2 with 2 Wideband Dome Antennas
$1,800.00
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
Description
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
Please note that the Cel-Fi GO X can only boost signal for one network at a time. If you have users on multiple networks in your building, you may need a multi-carrier booster or multiple GO X devices.
Cel-Fi WAVE Mobile App
The GO X can be easily optimized and monitored by the Cel-Fi WAVE application for iOS and Android devices. Cel-Fi’s mobile app allows you to connect to the device over bluetooth and see detailed diagnostic information, including measures of signal strength (RSRP), gain, and signal quality (SINR).
Coverage Area
As with all signal booster kits, the coverage area of the Cel-Fi unit depends on two factors:
- The number of indoor antennas you pair it with
- The signal strength at the location where the outdoor “donor” antenna is installed.
It has potential to cover up to 100,000 sq ft of open coverage area combined with sector antenna setup.
KIT CONTENTS
Cel-Fi GO-XD2 Booster Kit. Includes 100dB Gain Booster, 2 x Ceiling Dome Antennas & Wide Band Directional Antenna, 50′, 30′ (2) & 2′ Black FLEXPRO 400 Cable, 2′ SMA Male-N Female RG58 Cables (qty 2), 110-240 3A AC/DC Power Supply and 10″ Mounting Pipe. Cover up to 15,000 Sq. ft.
Sample Layouts
One Level Two Level Multi-Level
Cel-Fi GO X Bundles
Cel-Fi GO X bundles, with four different configurations, can be installed indoors or outdoors for 100 dB signal gain in areas up to 15,000 sq. ft. per system. The bundles include either Cel-Fi Omni Dome Antenna(s) for ceiling mount or Cel-Fi Wideband Panel Antenna(s) for wall mount, and include the Cel-Fi Wideband Directional Donor Antenna. Additional server antennas are available for venues with more floors or dense interior walls. For areas that suffer from extremely poor outdoor signal, the new high gain Cel-Fi LPDA Antenna is available.
Additional information
| Manufacturer |
|---|
Related products
Cel-Fi GO XP2 with 2 Wideband Panel Antennas
$1,799.00
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
Description
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
Please note that the Cel-Fi GO X can only boost signal for one network at a time. If you have users on multiple networks in your building, you may need a multi-carrier booster or multiple GO X devices.
Cel-Fi WAVE Mobile App
The GO X can be easily optimized and monitored by the Cel-Fi WAVE application for iOS and Android devices. Cel-Fi’s mobile app allows you to connect to the device over bluetooth and see detailed diagnostic information, including measures of signal strength (RSRP), gain, and signal quality (SINR).
Coverage Area
As with all signal booster kits, the coverage area of the Cel-Fi unit depends on two factors:
- The number of indoor antennas you pair it with
- The signal strength at the location where the outdoor “donor” antenna is installed.
It has potential to cover up to 100,000 sq ft of open coverage area combined with sector antenna setup.
KIT CONTENTS
Cel-Fi GO-XP2 Booster Kit. Includes 100dB Gain Booster, 2 x Wall Panel Antennas & Wide Band Directional Antenna, 50′, 30′ (2) & 2′ Black FLEXPRO 400 Cable, 2′ SMA Male-N Female RG58 Cables (qty 2), 110-240 3A AC/DC Power Supply and 10″ Mounting Pipe. Cover up to 15,000 Sq. ft.
Cel-Fi GO X Bundles
Cel-Fi GO X bundles, with four different configurations, can be installed indoors or outdoors for 100 dB signal gain in areas up to 15,000 sq. ft. per system. The bundles include either Cel-Fi Omni Dome Antenna(s) for ceiling mount or Cel-Fi Wideband Panel Antenna(s) for wall mount, and include the Cel-Fi Wideband Directional Donor Antenna. Additional server antennas are available for venues with more floors or dense interior walls. For areas that suffer from extremely poor outdoor signal, the new high gain Cel-Fi LPDA Antenna is available.
Additional information
| Manufacturer |
|---|
Related products
SureCall - Fusion5X 2.0 Canada
$1,699.99
Voice, Text & 4G LTE Cell Phone Signal Booster for Large Residences and Mid-Sized Commercial Buildings
Designed for mid-sized commercial buildings and large residences, Fusion5X 2.0™ increases voice, text and 4G LTE signals for all Canadian cell carriers and mobile devices. Configurable for all indoor environments, Fusion5X 2.0 reduces dropped & missed calls and improves 4G LTE data speeds to ensure everyone has a reliable connection to their mobile device.
Fusion5X 2.0 is the industry’s most powerful cellular signal booster in its class, covering up to 2X more area than the closest competitor. Its the chosen solution for mid- to large-size applications that need access to reliable voice, text, and data signals.
Description
Maximum Coverage Area: +16 dBm downlink power for 2X more coverage area than the closest competitor.
SureIQ™ Technology balances incoming signals, preventing shutdown and maximizing performance in strong signal environments.
Remote Monitoring: Fusion5X 2.0 is compatible with SureCall Sentry™ which allows users and installers to monitor the booster’s performance, set up alert notifications via the app and adjust settings from anywhere, anytime.
24/7 Peak Performance: Auto-adjusting gain and SureIQ work together to ensure 24/7 uptime at peak performance.
- Boosts voice, text and 4G LTE signals for all Canadian cell carriers
- Reduces dropped & missed calls and extends battery life for all cellular devices
- Multiple kitting options offer the flexibility to customize installation in any building or floor plan
- Industry best 3-year warranty and lifetime US-based tech support
Customer Support
Back Guarantee
| Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
| Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
| Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards |
| Input/Output Impedance: | 50 Ohm |
| Maximum Gain: | 72 dB |
| Noise Figure: | 8 dB |
| VSWR: | ≤2.0 |
| AC Input: | Input AC 110 V, 60 Hz / Output DC 12 V |
| Maximum Output Power: | 1 Watt EIRP |
| Downlink Power: | +16 dBm |
| Cable: | SC-400 |
| RF Connectors: | N-Female (both ends) |
| Power Consumption: | <25W |
| Operating Temperature: | -4ºF to +158ºF |
| Dimensions: | 9.25" x 6.375" x 1.375" |
| Weight: | 4 lb 4 oz |
Additional information
| Manufacturer |
|---|
Related products
SureCall - Fusion5s CA
$1,800.00
Voice, Text & 4G LTE Cell Phone Signal Booster for Large Buildings up to 35,000 sq ft
Fusion5s™ CA cell phone signal booster increases signal strength for voice, text and 4G LTE data for all Canadian cell carriers. Fusion5s CA covers up to 35,000 sq ft and delivers unrivaled performance with cutting-edge technology, reducing dropped and missed calls and extending battery life for 20+ multiple simultaneous users on all cellular networks.
The Fusion5s CA booster features sturdy metal construction and an industry leading 3-year warranty. Dropped calls are history, as the Fusion5s provides clear and consistent coverage for all cellular devices in a home or office.
Additional information
| Manufacturer |
|---|
Related products
SureCall - Force5 2.0 Canada
$6,999.00
Voice, Text & 4G LTE Cell Phone Signal Booster for Buildings up to 80,000 sq ft
Known as a wideband DAS solution, the 80dB SureCall Force5 2.0 Industrial BDA provides improved cellular coverage for large and enterprise buildings. The self-contained cell phone signal booster improves signal strength for all major North American cell carriers resulting in decreased dropped and missed calls and improved 4G LTE data performance.
Additionally, the Force5 2.0 Industrial comes equipped with built-in remote monitoring through SureCall's proprietary Sentry software and hardware. This allows integrators to optimize booster performance during installation and while located off-site using the Sentry mobile app or desktop portal.
Additional information
| Manufacturer |
|---|
Related products
