Key Features
- Control up to 200 Compatible PTZ Cameras
- Serial Control 5 Cameras Directly
- Zoom/Focus Rocker Joystick
- Touch Panel GUI, Touch Focus & More
Panasonic's Touchscreen Remote Camera Controller allows you to control up to 200 compatible Panasonic PTZ cameras over IP via a switching hub. Or you can control five cameras via direct RS-422 connection.
Rental Prices:
1 day $250
3 days $500
7 days $900
Description
Intuitive Camera Control for Ease of Use and One-Person Operation
A ZOOM/FOCUS rocker mounted on the joystick manages pan and tilt operations for zoom and focus control and intuitive single-handed operation. The built-in touch display allows for easy and quick operation of all essential camera functions.
Rear View
PoE+* support enables power supply via a LAN cable. Additionally, a dual system GPIO (general purpose input/output) terminal is equipped as standard.
- * Abbreviation of Power over Ethernet Plus.
FEATURES
- Easy Usability
-
- Touch Panel GUI for High-quality Operability and Visibility
- Quick Operation
-
- Touch Focus Function Equipped
- Smooth Creation of Cropped Images
- Easy Control
-
- Camera Settings Copied to Multiple Cameras
- Preset Memory for Simple Camera Control
- Tracing Memory for Memory and Recall of Camera Operations
- Multiple-camera Connection Supported for Large-scale Systems
| General | ||
|---|---|---|
| Power Requirements | 12 V DC (10.8 V to 13.2 V), DC 42 V to 57 V (Camera Input, PoE+ power supply) | |
| Current Consumption | 1.0 A (Connector Input), 0.6 A (PoE+ power supply) | |
| Ambient Operating Temperature | 0 °C to 40 °C (32 °F to 104 °F) | |
| Allowable Humidity Ranges | 10 % to 90 % (no condensation) | |
| Storage Temperature | -20 °C to 50 °C (-4 °F to 122 °F) | |
| Mass | Approx. 3.2 kg (7.05 lb) | |
| Dimensions (W x H x D) | 342 mm x 178 mm x 245 mm (13-15/32 inches x 7 inches x 9-21/32 inches) (excluding protrusions) |
|
| Connection Supported Equipment | IP/RS422 AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1*2, AW-HN130W/K*1*2, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1 |
|
| Input/Output Connectors | ||
| Input | DC 12 V IN | XLR 4‑pin |
| 3G-SDI IN | SMPTE424M/SMPTE292 / 75 Ω (BNC x 1) Supported formats: 1080/59.94p*2, 1080/50p*3, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF |
|
| Output | 3G-SDI ACTIVE THRU OUT |
SMPTE292 / 75 Ω (BNC x 1) |
| Input/Output | IP CONT | 100BASE‑TX PoE+ input Connection cable: LAN cable, max. 100 m (328 ft) • When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended • When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended |
| SERIAL CONT (RJ‑45) | RS‑422 (control signals for remote cameras) Connecting cable: Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft) |
|
| TALLY OUT | Open collector output (negative logic) Maximum voltage resistance DC 24 V, Maximum current 50 mA |
|
| TALLY/GPIO 1 | D‑sub 25‑pin, female, inch thread TALLY IN : 10 inputs (for receiving photocoupler signals) GPI : 6 inputs (for receiving photocoupler signals) GPIO : 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic) • Input/output switched with menu settings |
|
| GPIO 2 | D‑sub 25‑pin, female, inch thread GPI : 10 inputs (for receiving photocoupler signals) GPIO : 10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic) • Input/output switched with menu settings Reserve connectors: 2 connectors (For future expansion feature) |
|
| LCD Display | 7-inch Touch Panel GUI Monitor (WVGA(800×480)) | |
| SD Memory Card Slot | SDHC / SDXC Memory Card Slot x 1 | |
| Connection Specifications | ||
| No. of Connectable Cameras | 200 (IP), 5 (RS422) | |
| No. of Camera Selection Buttons | 10 | |
| No. of Camera Groups | 20 (10 units per 1 group) | |
| Memory | ||
| Preset Memory | No. of memory presets 100 | |
| Tracing Memory | No. of cameras | Cam1 to Cam10 |
| Recording time, no. of memory settings | Maximum 5 min. total per camera, maximum of 10 settings per camera | |
| Other Functions | ||
| No. of User Assignable Buttons | 6 + up to 10 on the LCD menu | |
| Pan / Tilt Speed Adjustment | 7 levels | |
| TALLY LED Display Color: | green / red | |
Additional information
| Manufacturer |
|---|
Related products
Get In Touch!
If you have any questions or comments we would be pleased to hear from you. Call our Customer Service department or inquire via email below.