Kenwood NX-3200_3300

VHF/UHF DIGITAL TRANSCEIVER MULTI-PROTOCOL DIGITAL AND ANALOG PORTABLE RADIOS

NX-3200/NX-3300

Features

Multi-Protocol Digital Radio
- Analog; NXDN or DMR
Freedom to migrate at your own pace
- Analog
- NXDN
- DMR
Automatic Call Identification
Display Option
- None
- Monochrome LCD
7-Color Light Bar
Universal Microphone Connector
Renowned Kenwood Audio
Built-In Bluetooth
Built-In GPS
Safety Sensors
- Man-down
- Stationary
- Motion Detection
IP54/55/67 and MIL-STD-810 C/D/E/F/G

Select options Details

Kenwood NX-3220_3320

The NX-3000 Series offers unsurpassed interoperability for a wide variety of users as it supports muluti digital CAIs — NXDN and DMR — plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace — whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. An NX-3000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/NXDN and FM/DMR.

NXDN:

A desired CAI can be selected at will – whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. The NXDN air interface can fit into the very narrow 6.25 kHz bandwidth using FDMA technology. Ensuring spectrum efficiency, wide coverage and virtually unlimited scalability, it provides for nationwide expansion: Type-C Trunking Gen2 offers enhanced features, flexibility and performance, linking up to 1,000 sites or 24 networks.

DMR:

For simple conventional communications, making use of existing infrastructure, DMR is an excellent, cost-effective solution. Being energy-efficient, it offers longer battery life. And thanks to 2-slot TDMA, it is possible to obtain 2 talk paths within an analog 12.5 kHz bandwidth, thus doubling the capacity. The NX-5000 Series supports Tier II conventional mode.

Select options Details

Kenwood nx-5200_5300_5400

The NX-5000 Series supports 2 digital CAIs — P25 (Phases 1 & 2) and NXDN™ – plus FM analog in a single radio. Unsurpassed interoperability is in your hands.

In addition to sophisticated sound analysis and optimization technologies, these radios feature Active Noise Cancelling based on leading-edge digital technology to offer clear communications even in very noisy environments.

During the development stage, NX-5000 Series radios go through a number of stringent tests as shown below. As a result, the portable radios complying with IP67/68 immersion standards offer max. 2-hour protection at a depth of 1 meter*, while the mobile radios comply with IP54/55 dust/water ingress protection standards.

*Applies for IP68

Contact : sales@wicom.ca for more information

Select options Details

Kenwood NX-5700_5800

$1,235.75

Contact

The NX-5000 Series supports 2 digital CAIs — P25 (Phases 1 & 2) and NXDN™ – plus FM analog in a single radio. Unsurpassed interoperability is in your hands.

A desired CAI can be selected at will – whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while.

P25 Phase 1&2 Digital CAI

P25 is a digital CAI to ensure interoperability among public safety agencies. The NX-5000 Series is compatible with Phase 1 (conventional and trunked), and Phase 2 (trunked).

NXDN™ Digital CAI

NXDN™ is a very narrowband protocol employing 6.25/12.5 KHz FDMA technology. NXDN™ offers a variety of advantages including spectrum efficiency and stability, scalability, flexible channelization, and wider coverage area.

An NX-5000 Series radio automatically identifies a call signal – whether it’s P25, NXDN™, or FM analog – and transmits in the same mode received.

Enhanced Mixed Zone allows any digital CAI and/or FM analog to reside in the same zone. Zone scan automatically sets all users in the same zone in the same RX/TX mode.

Integrated luminance sensor on a 2.55-inch (154 x 422 pixel) 65,536-color TFT display automatically adjusts the brightness of the backlight. On the screen, text data is shown in multi-line, as much as 5 lines.

The front panel can be removed and used as a remote controller. Also the Featured Panel* and RF Deck can be purchased separately to create Multiple Configurations. ^*Available in March 2015

Select options Details

Kenwood NX3720hg NX3820hg

Contact

This adaptable mobile radio supports both NXDN and DMR digital protocols as well as mixed digital FM analog operation, enabling it to serve with distinction in a wide range of enterprise- and operation-critical applications. Designed with flexibility in mind, it’s packed with convenient features like Bluetooth^® for hands-free operation and built-in GPS. And providing greater freedom of installation, the radio’s front panel can be used as a remote control head (this requires an optional upgrade, to be available in future). Additionally, for expansion capability a software license certification system facilitates extensive customization.

The NX-3000 Series offers unsurpassed interoperability for a wide variety of users as it supports muluti digital CAIs — NXDN and DMR — plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace — whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. An NX-3000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/NXDN and FM/DMR.

NXDN:: A desired CAI can be selected at will – whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. The NXDN air interface can fit into the very narrow 6.25 kHz bandwidth using FDMA technology. Ensuring spectrum efficiency, wide coverage and virtually unlimited scalability, it provides for nationwide expansion: Type-C Trunking Gen2 offers enhanced features, flexibility and performance, linking up to 1,000 sites or 24 networks.

DMR:: For simple conventional communications, making use of existing infrastructure, DMR is an excellent, cost-effective solution. Being energy-efficient, it offers longer battery life. And thanks to 2-slot TDMA, it is possible to obtain 2 talk paths within an analog 12.5 kHz bandwidth, thus doubling the capacity. The NX-5000 Series supports Tier II conventional mode.

Full Dots Matrix (256(W) x 82（H)dots, Monochrome) can display 4-Line Basic Frame and 4-Line Text Message Frame.

KENWOOD’s advanced ANR technology performs complicated noise reduction, which normally requires two microphones for processing, using single microphone.

Select options Details

Kenwood NX700 NX800

Contact

As smart in operation as they are in looks, these NX-700/800 radios feature everything necessary to take full advantage of both digital and analog operating modes. Mobile users will appreciate the large dot-matrix LCD, intuitive controls and multi-scan capabilities.

: - 30/50 W (136-174 MHz) Model - 30/45 W (400/470, 450-520 MHz) Models - 512-CH-GID / 128 Zones - 14 Character Alphanumeric Aliases - Dash & Remote Mount - Programmable Function Keys - Dual Priority Scan - Emergengy/AUX Keys - Enhanced KENWOOD Audio - DB-25 Accessory Connector - Cloning - Voice inversion scrambler - Front Panel Test & Tune - Easy Option Port - MIL-STD 810 C/D/E/F - MIL-STD "Driven-Rain" - FM Conventional & LTR Included - NXDN Conventional Included - Trunking Options Available - FleetSync®/II digital signaling system includes PTT ID digital ANI (FM) - Multi-Site IP Network Compatible - MPT Option

: MODELS - Model Type 1: 700 (136-174 MHz), 800 (450-520 MHz) - Model Type 2: 800 (400-470 MHz) - Model Type 3: - - RF Power Output: 30 W - 1 W - Channel/Zone Capability: 512 CH / 128 Zones - Mounting Options: Multiple Configurations KEYS & SWITCHES - Up/Down Selectors: 4 Selectors - Front Keys: 6 PF Keys - AUX I/O's: 9 Programmable + 2 O GENERAL FEATURES & PROGRAMMING - LCD: Backlit Dot Matrix LCD - 3-Digit Sub-Display: Yes - Function/Status LCD Icons: Yes - Alphanumeric Aliases: 14 Character - Date, 12/24 Hour Clock: Yes - Transmit/Busy/Call Alert/Warn LED: Yes - Multi-Language Display: Yes - Ignition Sense: Yes - Public Address / Horn Alert Option: Yes - GPS Receiver Option: Yes - Dimensions (W x H x D): 6.30 x 1.77 x 6.18 in. - Weight (net) - Radio Only: 3.04 lbs. - MIL-STD: MIL-STD-810 C/D/E/F/G - 800 MHz: - - KENWOOD LTR Features: Yes DIGITAL - NXDN: Yes - P25: Optional FleetSync®/II (FM) - FleetSync Capable: Yes - Caller ID Display: Yes - Short Text Messages: Yes - Status Messaging: Yes

Details

Kenwood NXR5700 NXR5800

$7,448.75

Contact for more information

NXR-5700/5800

Key Features: NXDN Conventional / Trunk ･Conventional ･Conventional IP Network ･NEXEDGE Type-C Network ･NEXEDGE Type-C Gen2 Network Mixed Mode Operation - Digital / Analog FM Power Output - 25 W / 0.5 Watts (100% Duty) IP LAN/WAN Connectivity Ethernet Network Interface SNMP Protocol Ready Frame Error Rate (FER) / RSSI Output Built-In 0.5 ppm TCXO

Add to cart Details

Kenwood NXR710 NXR810

$2,777.75

Contact for more information

: Frequency Range ･VHF: 136-174 MHz (NXR-710) ･UHF: 450-520 MHz, 400-470 MHz (NXR-810) RF Output ･VHF: 50 W @ 50% duty, 25 W @ 100% duty (NXR-710) ･UHF: 40 W @ 50% duty, 25 W @ 100% duty (NXR-810) Repeater Operation Duplex / Simplex Base Operation 30 CH Scanning Base Two-Digit LED Display 6 Lighted Programmable Function Keys Front Panel Speaker Rear External Speaker Output (4 W Audio) Volume Control Microphone Jack Program Interface Remote Termination Interface Programmable AUX I / O's RF Power Down Detect DTMF Front Panel PF Key Control DTMF AUX Output Control DTMF AUX Input Monitoring External Frequency Reference (10 MHz) Connectivity Windows® PC Programming Flash Firmware Upgrading

Add to cart Details

Kenwood PKT-23P

$234.75

At only 3.9oz, KENWOOD’s PKT-23 UHF two-way radio provides 1.5 watt transmit power, 16 channels, and up to 15 hours of operation. This small but powerful radio is simple to operate and durable, meeting or exceeding MIL-Spec standards 810 C/D/E/F/G (11 items) and IP54 (dust/water intrusion). Connect to the standard micro USB port to charge or use included charging cup, and plug KENWOOD headphones into the 3.5mm audio jack for hands free operation. Versatile, strong, and small - the PKT-23 is built business tough.

: Contact sales@wicom.ca

Add to cart Details

Kenwood TK7302h TK8302h

Contact for more information

KENWOOD's new TK-7302/8302 delivers reliable mobile performance with extra wideband coverage (UHF: 70MHz) and such features as QT/DQT signaling, multiple scan functions and a voice inversion scrambler. Yet this tough IP54/MIL-STD-compliant radio is decidedly user-friendly, providing high-quality audio, voice announcement, and a large display with adjustable brightness for simple operation, day and night.

The TK-7302/8302 offers ample capacity for multiple channels and radio systems: 16 channels and 2 zones. And once it is programmed, users can select specific channels within a set range.

Clear audio means confident communications, but power output is not the only factor that determines how easy it is to use a radio in varying noisy environments. As an audio specialist experienced in psychoacoustics, KENWOOD can draw on decades of expertise at every step: component selection, construction, optimization, evaluation and analysis. The resulting audio performance - specially engineered for transceivers and with frequency response optimized for the human voice - is undeniably clearer and crisper.

A D-sub 15-pin terminal enables the simple connection of various types of external equipment. It can be used for Ignition sense, External Switch, Horn Alert, and External Mic, among others. A Molex interface is also available with the optional KCT-60M cable.

Encoder/decoder function uses QT/DQT to segregate talk groups, so users only hear calls from their own group. DTMF PTT ID is included for dispatch operations or for a simple remote control application.

Utilizing KENWOOD's FleetSync® signaling protocol, the TK-7302/8302 has PTT ID (ANI: automatic number identification) and Selective Calling capabilities for managed dispatch operations. Programmed Status(by FPU) can also be sent.

The 2-tone signaling format is provided for use with the most common radio systems.

Built-in MDC signaling means the following features are available: - PTT ID Encode - Emergency Encode - Stun/Revive Decode - Radio Check Decode

For hazardous/hostile duty environments, a PF key can be programmed for emergency use to alert the dispatcher or other group members via DTMF, FleetSync® or MDC-1200 signaling.

The built-in programmable voice inversion scrambler provides basic protection against casual eavesdropping. It is possible to have a unique scrambler setting for each channel by picking the voice inversion frequency from one of 16 tables.

The blue LED indicator can be customized to provide useful status information. For example, it can be used in combination with the orange LED for Selective Call differentiation.

Connected to an external GPS receiver, the TK-7302/8302 can transmit accurate vehicle location data to the central base station for fleet management purposes. Designated scrambler and GPS modules can be installed internally.

- Multiple Scan Functions, including Priority Scan - Voting (automatic repeater search & selection) - Independent Setting Per Channel (compander, scrambler) - BCL (Busy Channel Lockout) - 9 Programmable Function Keys - Talk Around - Horn Alert Function - Companded Audio (narrow/wide) - 3-colour LED (red, orange, green) - Voice Announcement (choice of language between English, Spanish, French, German, Italian, Dutch, Russian and Chinese) - Password Protection - Time-out Timer - Minimum Volume Setting (by FPU) - Operator Selectable Tone Settings - Embedded Message - 8 Programmable Accessory Ports (for External Control) - Scan Del/Add Function - KENWOOD ESN (Electronic Serial Number) - Radio Stun - Adjustable Microphone Gain (FPU only): High/Normal - Microsoft Windows® PC Programming & Tuning *1 This function cannot be used in certain countries. Please contact your KENWOOD dealer for further information.

: - Extra wideband coverage (UHF: 70MHz) - IP54/MIL-STD-compliant radio - 16 Channels, 2 Zones - Enhanced KENWOOD Audio - External D-SUB 15-PIN Interface - QT/DQT/DTMF - FleetSync® PTT ID, SelCall & Status - 2-Tone (Encode/Decode) - MDC-1200 Signaling - PTT ID Encode, Stun/Revive Decode, Emergency Encode) - Programmable Voice Inversion Scramble - Programmable Blue LED - GPS Feature(Optional GPS Receiver) - Multiple Scan Functions, including Priority Scan - Independent Setting Per Channel (compander, scrambler) - 9 Programmable Function Keys - Horn Alert Function - 3-colour LED (red, orange, green) - Voice Announcement - Minimum Volume Setting - Password Protection - Microsoft Windows® PC Programming & Tuning

Details

Kenwood TK7360h

Contact for more information

Compact 128 Channel Synthesized Analog Mobile Two-Way Radios TK-7360H

KENWOOD’s 360-Series mobile radios offer our customers a total package of price, performance and features in an exciting new compact mobile platform. These KENWOOD models are engineered for UHF or VHF conventional operation. With sleek styling, refined operator controls, scores of features, and KENWOOD’s signature audio all at a remarkable price, 360 Series mobiles are the perfect combination of quality, style, sound and value. For a complete list of product features and specifications, please download the product brochure.

: 128 x 128 Capacity World-Class Audio Installation Interfaces Power Control Customizable Short Text Messaging All System Signalling Color Safety GPS AVL Voice Storage & Guide Multiple Scan Functions

: MODELS - Model Type 1: 7360 (136-174 MHz), 8360 (450-520 MHz) - Model Type 2: 8360 (400-470 MHz) - Model Type 3: - - RF Power Output: 5 W/25 W/50 W, 5 W/25 W/45 W - Channel/Zone Capability: 128 CH / 128 Zones - Mounting Options: Multiple Configurations KEYS & SWITCHES - Up/Down Selectors: 4 Selectors - Front Keys: 10 PF Keys - AUX I/O's: - GENERAL FEATURES & PROGRAMMING - LCD: Backlit Dot Matrix LCD - 3-Digit Sub-Display: - - Function/Status LCD Icons: Yes - Alphanumeric Aliases: 10 Character - Date, 12/24 Hour Clock: - - Transmit/Busy/Call Alert/Warn LED: Yes - Multi-Language Display: - - Ignition Sense: Yes - Public Address / Horn Alert Option: Yes - GPS Receiver Option: Yes - Dimensions (W x H x D): 6.3 x 1.7 x 5.4 in. - Weight (net) - Radio Only: 2.6 lbs. - MIL-STD: MIL-STD 810 C/D/E/F - 800 MHz: - - KENWOOD LTR Features: - DIGITAL - NXDN: - - P25: - FleetSync®/II (FM) - FleetSync Capable: Yes - Caller ID Display: Yes - Short Text Messages: Yes - Status Messaging: Yes

Details

Kenwood Viking VM5000

Contact for more information

Uncompromised quality and performance with public safety ergonomics, KENWOOD Viking is the industry’s only mobile platform providing TrueVoice™ noise cancellation.

Request Quote/Demo

Product Info

Mixed protocol operation (P25 Phase 1 & 2, Viking16, FM Analog)
1024 channels
Mixed protocol zones
P25 Authentication (Link Layer Authentication)
P25 IP packet data
P25 GPS data (built in GPS)
MDC-1200 & GE-Star signaling
P25 Conventional vote scan
Dash mount (KCH-19 only)
Remote mount*
Dual control heads* (option)
Internal or external speaker
Fixed control station
Encryption
- ARC4™ software encryption; compatible with Motorola ADP™
- P25/TIA defined: AES-256
- DES-OFB
- Over-the-Air-Rekeying (OTAR)
- VK5000 or Motorola KVL3000/KVL4000 Keyloaders

Details

Search for sales, services, products, rentals, and community right here!

Product categories -

Product Manufacturer -

Kenwood NX-3200_3300

Features

Kenwood NX-3220_3320

Kenwood nx-5200_5300_5400

In addition to sophisticated sound analysis and optimization technologies, these radios feature Active Noise Cancelling based on leading-edge digital technology to offer clear communications even in very noisy environments.

Contact : sales@wicom.ca for more information