CFG0-M-RV CEL-FI GO RV

Description

Cel-Fi GO M RV vehicle cell phone signal booster is for boosting reception of any single Canadian Carrier network (switchable) at one time such as Bell, Rogers, Telus, Sasktel or Freedom Mobile. It is suitable for using in vehicles including cars, trucks, SUVs, RVs and marine vessels. The Go-M uses Nextivity's Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage for 3G, 4G, and LTE.

This Cel-Fi GO M RV Bundle has the vehicle cell phone signal booster kit which comes with thread-mount exterior roof-mount antenna, 20 feet cable LMR-195 and connector SMA Male to SMA Female, and internal coverage antenna.

Nextivity Cel-Fi GO-RV Band 2/4/5/12/13MKit provides gain of 65 dB with Intelliboost technology. The GO RV can adjust to changing cellular network conditions automatically while you're on the move. This unit also supports multiple devices.

As this version of the Cel-Fi GO M only boosts signals for any one carrier at a time, it is a good choice for one or more people on a single network such as Bell Mobility, Rogers Wireless, Telus Mobility, Sasktel or Freedom Mobile. However, if multiple people on multiple networks are using the vehicle, a simultaneous multi-carrier vehicle booster that works for all carriers at the same time may be a better option.

The NEMA 4 weather resistant rating means that the unit is protected against windblown dust and falling dirt, and water such as rain, snow, sleet and hose directed water. The unit will not be damaged if ice forms on the outside of the enclosure.

Cel-Fi WAVE Mobile App.

Cel-Fi WAVE smartphone app runs on the GO M and will help you get the best performance from it. That app is available for Android and iOS. It provides a User Interface to Cel-Fi systems. Application's dashboard shows the system's "Boost" value, allowing you to monitor the signal gain the GO M provides.

Benefits.

• Mobile Coverage for cars, trucks, RVs, and boats.
• Boosts 3G / 4G / LTE Voice and Data.
• NEMA 4 Rating.
• Multi-Carrier Support with Carrier Switching (one carrier coverage at a time).
• App for Optimized Performance.
• Network Safe.

Outside Antenna:

The RV 5 dBi antenna comes with NMO 17' cable and mirror / clamp-on mount.

Cel-FI Mobile Mag. Mount Antenna is built to magnetically attach to cars, trucks, vans, SUVs, and RVs. The Cel-Fi Screw Mount Antenna has screw fixings.

Inside Antenna:

Cel-Fi Mobile Server Antenna is a cellular / LTE PANEL antenna. It has up to 9 dBi of gain. The antenna has a backside clip that can be mounted onto any RV wall.

Compatibility:

This signal amplifying unit will boost cell network of all Canadian Carriers including Bell Mobility, Rogers Wireless, Telus Mobility, Freedom Mobile, and Sasktel.

Installation.

Cel-Fi GO M can be installed by persons who are comfortable running cabling and doing simple car maintenance. You might however consider asking a friend, finding a local electronics installer/ handyman, or an auto repair/ detailing shop to install it for you. Are you installing in a vehicle that will stay stationary for a while, such as a recreational vehicle (RV)?

If you are not moving, you can switch the GO-M to stationary mode on the Cel-Fi WAVE app to use up to 100 dB of gain and coverage up to 12,000 sq ft. The coverage will depend on the antenna isolation, antenna choice, and mode it is set to. You can always use a panel antenna inside to direct the signal towards a specific direction to increase the coverage bubble or even use two antennas one inside and one outside when you are stationary.

The more separation between the antennas, the larger the coverage bubble.

Below is one example.​

Please call us if you have any questions.

Specifications.

Supported Phones.	Cell Phones, Hotspots, and any Device that uses Cellular Data.
Gain.	65 dB.
Impedance.	50 ohm.
Output power.	Maximum UL power 20-22dBm EIRP, Maximum DL power 10dBm per 5 MHz EIRP.
Power supply.	In-Car Charger Included.
Loss.	8 dB.
Connector type.	SMA Female.