-
The M605 is not just a radio. It’s a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as another station on the vessel along with two COMMANDMICS™. Customers will appreciate the radios large bright display that includes night mode to view easily in the dark. The full featured M605 also gives customers the option of the radio with an integrated AIS receiver. The best just got better! -
Icom’s new Class D DSC fixed mount VHF marine transceiver, the M510 is a tech-laden powerhouse available with or without AIS receive capability. The M510 is nearly half the depth of the M506, allowing installation in more confined spaces. The large color display has a simple user interface allowing casual and serious boaters alike with plenty of options to communicate. Additionally, command and control using iOS® and Android™ smart devices with class leading features such as wireless calling. -
UHF CHANNEL MODULE OPTION FOR FR6300 REPEATER
-
VHF CHANNEL MODULE OPTION FOR FR5300 REPEATER
-
The FR6300 is a second generation IDAS™ repeater that builds upon the powerful product line with the affordable, low complexity digital simulcast capabilities and a new CPU/FPGA platform. Increase coverage with simulcast by adding repeaters to pair on the same networks.Output Power:
50W (50% Duty Cycle) Frequencies:
136-174 VHF/ 400-470, 450-512 UHF Channels:
32 Height:
2U Digital Conventional:
IDAS™ built-in Digital Trunking:
Optional Boards/Modules -
General Frequency coverage F9511S/T/HT 136–174MHzF9521S/T 400-470MHz 450-512MHzNumber of channels Max. 512 channels/ 128 zones Power supply requirement 13.6V DC nominal Current drain (approx.) 50W Version Tx High (50W) 11..0A/14.0A (VHF/UHF) Rx Max. Audio 1000mA Stand-by 350mA 110W Version Tx High (110W) 22.0A Rx Max. Audio 3.0A Stand-by 400mA Operating temperature range –30°C to +60°C; –22°F to +140°F Antenna impedance 50Ω (SO-239) Dimensions (W×H×D) 175×45×170mm; 67⁄8×125⁄32×611⁄16in Weight 50W 110W 1.5kg; 3.3lb 1.5kg; 3.3lb Rated output power 50W/110W Channel spacing 15/30 kHz (VHF), 12.5 kHz (UHF) (analog) 12.5 kHz (digital) Transmitter Output power 50W, 25W, 5.0W Max. frequency deviation Maximum pattern Minimum pattern ±5.0/2.5 kHz (Wide/Narrow) ±2.85 kHz (Digital) ±0.95 kHz (Digital) Frequency error ±1.0ppm Spurious emissions 70dB min. Adjacent channel power 70/60dB min (wide/Narrow) 67dB min. (Digital) FM hum and noise 48/45dB typ. (VHF, Wide/Narrow) 48/43dB typ. (UHF, Wide/Narrow) Audio harmonic distortion 3% typ. (40% deviation) External microphone impedance 600Ω (8-pin modular) Receiver Sensitivity Analog Digital 0.25μV typ. (at 12dB SINAD) 0.25μV typ. (at 5% BER) Squelch sensitivity 0.25μV typ. (at threshold) Adjacent Ch. selectivity Analog (TIA/EIA603B) (TIA/EIA603) Digital 81/53dB typ. (VHF, Wide/Narrow) 79/53dB typ. (UHF, Wide/Narrow) 63dB typ. Spurious response 85dB min. (VHF) 70dB* min. (UHF) *85dB min (406. 1-420 MHz) Intermodulation 78dB typ. Audio output power 50W External audio (D-sub) 110W External audio (D-sub) 1.0W typ. at 10% distortion with a 8Ω load 4W typ. 22W typ. at 10% distortion with a 4Ω load Hum and noise ratio 55/51dB typ. (VHF, Wide/Narrow) 30/45dB typ. (UHF, Wide/Narrow) 52dB typ. (Digital) External speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/4Ω Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
Also meets equivalent MIL-STD-810-C, -D, -E and -FStandard MIL 810 G Method Proc Low Pressure 500.5 I, II High Temperature 501.5 I, II Low Temperature 502.5 I, II Temperature Shock 503.5 I Solar Radiation 505.5 I Humidity 507.5 – Salt fog 509.5 – Dust Blowing 510.5 I Vibration 514.6 I Shock 516.6 I, IV Ingress Protection Standard Dust & Water IP54* (Dust-protection and water resistant) -
Waterproof Analog / Digital IDAS UHF Portable Radio, 400-470 MHz, 5W, 512 Channels, Built-in GPS Receiver, Inversion Scrambler Built-in, with Full DTMF KeypadComes with antenna (FA-SC57U), battery (BP-232WP), belt clip (MB-94R), owners manual -
With Built-in GPS and Waterproof Protection 
IP67 Dust-tight & Waterproof Protection Man Down and Lone Worker Functions for Emergency Call 800mW (typ.) Audio Output Power Built-in GPS Receiver 14-pin Accessory Connector Large Full Dot-matrix LCD Individual/group call Individual ID and talkgroup ID memories Built-in 2-Tone and 5-Tone (Analog mode only) Scan Features Built-in Voice Scrambler 512 memory channels with 128 zones 5W output power both in VHF and UHF Power on password Busy channel lockout, repeater lockout Tactical group function 8 DTMF autodial memories MIL-STD 810 G rugged construction -
ICOM Hand Microphone For PS80. -
ICOM Base Station With Power Supply and Microphone. -
ICOM Vehicle Mounting Kit. Includes Microphone, Harness and Speaker. -
ICOM Rear Panel Adapter For Card Edge Connector. -
Icom’s A220 panel mount transceiver is a popular fit with experimental and light sport pilots. The TSO approved version will work for all certified part 23 aircraft. This air to ground transceiver has the capability to work on both 8.33 kHz and 25 kHz channel spacing frequencies. It features the brightest OLED (Organic Light Emitting Diode) display on the market offering many advantages in brightness, vividness, high contrast, wide viewing angle and response time compared to a conventional display. The A220 also features a built in 2 station intercom, 12 or 24 volt compatible, and automatic squelch. -
Icom’s A220 panel mount transceiver is a popular fit with experimental and light sport pilots. This ground to air transceiver has the capability to work on both 8.33 kHz and 25 kHz channel spacing frequencies. It features the brightest OLED (Organic Light Emitting Diode) display on the market offering many advantages in brightness, vividness, high contrast, wide viewing angle and response time compared to a conventional display. The A220 also features a built in 2 station intercom, 12 or 24 volt compatible, automatic squelch and GPS memory function. -
ICOM 5m Cable Between VE-PG3 and A120. -
Versatile Radio Over IP Gateway
The VE-PG3 is designed to enhance the communication coverage of a radio network and the convenience of radio usage by leveraging IP networking technology with ease of implementation. The VE-PG3 has two modes; converter mode and bridge mode. The converter mode converts radio audio into VoIP/analog phone calls and allows interconnection between connected equipment. The bridge mode connects two or more radio sites over an IP network and received radio audio is bridged to opposing radio sites of the network. The bridge mode can connect dispersed radio sites over the network and can provide cross band, cross category communication. -
ICOM A120 Speaker Microphone. -
ICOM A120 Headset Adapter. -
ICOM Base Station Cover. -
ICOM Magnetic Mount With Cable And Connector. -
ICOM Vehicle Antenna Whip 118-136MHz, Requires Mount. -
ICOM 20' RG58 With Connectors. (Use With BSA118B) -
ICOM 3db Base Station Antenna.
-
Icom’s A120 air band mobile introduces two new features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The newly added built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition. Insert the optional UT-133A Bluetooth® unit and connect a third-party wireless Bluetooth® headset.
Search for sales, services, products, rentals, and community right here!
855.85.wicom
sales@wicom.ca
wicom.ca
© 2025 Wi-Com Solutions Inc. - We Hear You Loud and Clear. All rights reserved.