SureCall


Product categories -

  • 80 dB Public Safety Band Signal Booster

    SureCall's Guardian QR700 is a Public Safety Band signal booster that amplifies 700 MHz in Canada for crucial communications, delivering consistent signal for First Responders inside buildings with weak signal strength. In the majority of cases, newly constructed buildings with considerable size, or existing buildings that increase capacity by expanding the building footprint are required to have signal strength of -95 dBm or better in designated critical areas – elevators, stairwells, etc. – in order to receive a certificate of occupancy. Guardian QR700 meets the code for NFPA 1221 and IFC 510 and features a NEMA-4 rated amplifier housing, which eliminates the need for an additional NEMA enclosure. Additionally, the Guardian3 QR700 comes equipped with dry contact 7-pin alarming capability, UPS and Ethernet port enabled remote monitoring. The Guardian QR700 amplifier features sturdy metal construction and is covered by an industry leading 3-year warranty.
  • SureCall Universal Antenna Cradle

    SureCall Universal Cradle with Passive Antenna (DISCONTINUED)
  • Cel-Fi Quatra 1000

    Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague occupants in middleprise buildings. Cel-Fi QUATRA is an Active DAS Hybrid that solves this problem. It is an affordable, all-digital solution. It provides uniform, high quality cellular signal throughout a building, and is scalable to the size needed. Cel-FI QUATRA is carrier approved and guaranteed network safe. Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger, utilizing CAT 5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. Cel-Fi QUATRA can be installed in just days (compared to months typical of other solutions), and at a price point that meets the middleprise budget.

    Smart Cellular Coverage

    Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
    • Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
    • Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
    • Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
    • Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
    • Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
    • All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
    • Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
    • Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
    • Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
  • Cel-Fi QUATRA 1000/2000 Range Extender QRE Module

    Cel-Fi QUATRA Range Extender is a Power over Ethernet (PoE) device that extends the maximum cable distance between the NU and the CU.
    • Extend 100 Meters with CAT5
    • Extend 150 Meters with CAT6
    Downloads User Manual Wave Portal Guide
  • Cel-Fi Quatra 2000

    Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, Cel-Fi QUATRA 2000 is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe. Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes Cat5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).

    Features:

    The QUATRA Network Unit (NU) is the hub of the system. The scalable design works with one to four Coverage Units to provide up to 50,000 ft2 (5,000 m2) of coverage. The QUATRA NU:
    • Provides a donor signal to the QUATRA system
    • Provides power to the Coverage Units (up to four)
    • Connects to the Cel-Fi WAVE cloud platform for remote monitoring and management
    • QUATRA 2000 supports a dual carriers
    • Supports Band 2/4/5/12/13/25, Band 66 is configurable

    Smart Cellular Coverage

    Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
    • Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
    • Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
    • Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
    • Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
    • Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
    • All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
    • Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
    • Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
    • Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
  • Cel-Fi Quatra 2000

    Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, Cel-Fi QUATRA 2000 is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe. Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes Cat5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).

    Features:

    The Cel-Fi QUATRA Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power-Over-Ethernet (POE) for up to four CUs. The QUATRA CU:
    • Provides coverage for the QUATRA system (up to four per Network Unit)
    • Power is delivered by Power-Over-Ethernet from the Network Unit
    • Self-configuring and self-optimizing
    • Note: QUATRA 2000 CU’s are only compatible with QUATRA 2000 NU’s

    Smart Cellular Coverage

    Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
    • Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
    • Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
    • Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
    • Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
    • Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
    • All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
    • Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
    • Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
    • Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
  • CEL-FI QUATRA EVO

    In-Building Cellular Coverage Solution

    CEL-FI QUATRA EVO represents the ultimate solution for addressing the cellular coverage challenges encountered in enterprise environments. It operates as an active DAS hybrid, ensuring a seamless, high-quality cellular signal throughout any building. Distinguished by its all-digital approach, QUATRA EVO leverages category cabling and Power-over-Ethernet architecture, delivering unparalleled signal amplification and scalability that set industry standards. Furthermore, this cost-effective, carrier-grade system offers the advantage of fiber expansion capabilities, enabling effortless expansion of your coverage area. Remarkably, QUATRA EVO can be swiftly installed within days, minimizing downtime. Moreover, it boasts carrier approval and guarantees network safety without compromise. Features and benefits include:
    • Scalable all-digital active DAS hybrid for enterprise environments
    • Flexible to configure for single or dual operator server application
    • Multi-carrier signal booster for 3G, 4G, and 5G with industry-leading signal gain up to 100 dB
    • Carrier approved and unconditionally network safe
    • Lossless RF signal and Power-over-Ethernet (PoE) distribution with easy-to-install category cable architecture
    • Site installation flexibility with operator specific donor antenna or small cell signal source
    • Remotely monitor and configure with Nextivity WAVE Portal cloud management

    QUATRA EVO Coverage Unit

    The Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power over Ethernet (PoE) for up to six CUs.
    • Distributes signal across the coverage area inside the building (up to six per Network Unit)
    • Power delivered by Power Over Ethernet from the NU
    • Self-configuring and self-optimizing
    • CEL-FI QUATRA EVO CU is only compatible with CEL-FI QUATRA EVO NU
     

    Coverage Made Easy

    This one or two operator / two-port solution has many of the features of our flagship, four-port QUATRA 4000 systems including:
    • Scalable all-digital architecture
    • Flexible configuration
    • IntelliBoost technology with the best echo cancellation, gain, and coverage footprint in the industry
    • 3G/4G/5G
    • Support for up to Six (6) Coverage Units (CUs)
    • Compatability with optional fiber hub for even more coverage options (up to 12 CUs)
    • Use of category cabling and PoE
    • Hassle-free installation with minimal disruption to operations
  • CEL-FI QUATRA EVO

    In-Building Cellular Coverage Solution

    CEL-FI QUATRA EVO represents the ultimate solution for addressing the cellular coverage challenges encountered in enterprise environments. It operates as an active DAS hybrid, ensuring a seamless, high-quality cellular signal throughout any building. Distinguished by its all-digital approach, QUATRA EVO leverages category cabling and Power-over-Ethernet architecture, delivering unparalleled signal amplification and scalability that set industry standards. Furthermore, this cost-effective, carrier-grade system offers the advantage of fiber expansion capabilities, enabling effortless expansion of your coverage area. Remarkably, QUATRA EVO can be swiftly installed within days, minimizing downtime. Moreover, it boasts carrier approval and guarantees network safety without compromise. Features and benefits include:
    • Scalable all-digital active DAS hybrid for enterprise environments
    • Flexible to configure for single or dual operator server application
    • Multi-carrier signal booster for 3G, 4G, and 5G with industry-leading signal gain up to 100 dB
    • Carrier approved and unconditionally network safe
    • Lossless RF signal and Power-over-Ethernet (PoE) distribution with easy-to-install category cable architecture
    • Site installation flexibility with operator specific donor antenna or small cell signal source
    • Remotely monitor and configure with Nextivity WAVE Portal cloud management
     

    QUATRA EVO Network Unit

    The Network Unit (NU) is the hub of the system. Each NU works with one to six Coverage Units (CU) for maximum scalability and design flexibility. 
    • Receives donor signal(s) for the system
    • Provides power and distributes donor signal(s) to CUs (up to six)
    • Connects via Ethernet or LTE Modem to the Nextivity WAVE Platform for remote monitoring and management
     

    Coverage Made Easy

    This one or two operator / two-port solution has many of the features of our flagship, four-port QUATRA 4000 systems including:
    • Scalable all-digital architecture
    • Flexible configuration
    • IntelliBoost technology with the best echo cancellation, gain, and coverage footprint in the industry
    • 3G/4G/5G
    • Support for up to Six (6) Coverage Units (CUs)
    • Compatability with optional fiber hub for even more coverage options (up to 12 CUs)
    • Use of category cabling and PoE
    • Hassle-free installation with minimal disruption to operations
  • SureCall 2′ LMR400 Cable (N Male – N Male)

    SureCall 2′ LMR400 Ultra Low Loss Coax Cable (N Male – N Male Connectors).
  • SureCall DC/DC 12V 5A Vehicle Power Supply w/DC Jack

    SureCall DC/DC 12V 5A Vehicle Power Supply w/DC Jack. Use for Fusion2Go 3.0.
  • SureCall AC/DC 6V 2.5A Power Supply w/DC Jack

    SureCall AC/DC 6V 2.5A Power Supply w/DC Jack. Use for Fusion2Go 3.0, Fusion4Home and FusionPRO.
  • SureCall Coupler -6dB (N-Female)

    SureCall 50 Ohm 698-2700 MHz -6dB Coupler.
  • SureCall Coupler -10dB (N-Female)

    SureCall 50 Ohm 698-2700 MHz -10dB Coupler.
  • SureCall AC/DC 12V 3.8A Power Supply w/DC Jack

    SureCall AC/DC 12V 3.8A Power Supply W/DC Jack. Use for Fusion5s and Fusion5x.
  • SureCall 20′ LMR400 Cable (N Male – N Male)

    SureCall 20′ LMR400 Ultra Low Loss Coax Cable (N Male – N Male Connectors).
  • SureCall Ceiling Mount Dome Antenna (N-Female)

    Low-profile and unobtrusive, SureCall’s indoor Omni-directional ceiling dome antenna is designed to be ceiling-mounted so it easily blends with your indoor environment. The antenna transmits and receives signal in a 360 degree pattern and is designed to cover 2G/3G/4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies.
  • SureCall Splitter -3 dB (N-Female)

    SureCall 50 Ohm 2-Way Power Splitter, -3 dB, 698-2700 MHz, N Female, Square Body
  • SureCall 30′ LMR400 Cable (N Male – N Male)

    SureCall 30′ LMR400 Ultra Low Loss Coax Cable (N Male – N Male Connectors).
  • SureCall Splitter -4.8 dB (N-Female)

    SureCall 50 Ohm 3-Way Power Splitter, -4.8 dB, 698-2700 MHz, N Female, Square Body
  • SureCall Lightning Surge Protector (F Male – F Female)

    Protect your cell phone signal boosters from electrical surges with this in-line surge protector for RG6 and RG11 cables.
  • SureCall Lightning Surge Protector (N-Females)

    Protect your cell phone signal boosters from electrical surges with this in-line surge protector for LMR400 and LMR600 cables.
  • SureCall Splitter -6 dB (N-Female)

    SureCall 50 Ohm 4-Way Power Splitter, -6 dB, 698-2700 MHz, N Female, Square Body
  • SureCall 50′ LMR400 Cable (N Male – N Male)

    SureCall 50′ LMR400 Ultra Low Loss Coax Cable (N Male – N Male Connectors).
  • SureCall AC/DC 19V 4.7A Power Supply w/DC Jack

    SureCall AC/DC 19V 4.7A Power Supply w/DC Jack. Use for Force 5.
  • SureCall Omni 4 dBi Fiberglass Wide Band Antenna (F-Female)

    Wide band omni-directional 75 Ohm antenna with F-Female connector designed for use with SureCall in-building cell phone signal boosters.
  • SureCall Omni 4 dBi Fiberglass Wide Band Antenna (N-Female)

    Wide band omni-directional 50 Ohm antenna with N-Female connector designed for use with SureCall in-building cell phone signal boosters.
  • SureCall Omni 9 dBi Fiberglass Dual Band Antenna (N-Male)

    Dual Band 30″ omni-directional 50 ohm outdoor antenna with N-Female connector designed for use with SureCall dual band cell phone signal boosters.
  • SureCall 75′ LMR400 Cable (N Male – N Male)

    SureCall 75′ LMR400 Ultra Low Loss Coax Cable (N Male – N Male Connectors).
  • SureCall 100′ LMR400 Cable (N Male – N Male)

    SureCall 100′ LMR400 Ultra Low Loss Coax Cable (N Male – N Male Connectors).
  • N-Range 2.0

    Most Powerful Single User Vehicle Cell Signal Booster

    Stay connected further with the go-to cradle booster that delivers faster data speeds, better call clarity, and best-in-class performance for more reliable voice and 4G LTE data for all carriers. N-Range 2.0 features SureCall's game-changing patented ERT and 2XP technologies that provide twice the uplink power, downlink gain, and higher Signal to Noise Ratio (SINR) giving the user the best possible performance in the most challenging of signal environments. Extended Range Technology (ERT) amplifies cell signals outside the vehicle, bypassing cable loss and producing faster data speeds while keeping users connected farther from cell towers. N-Range 2.0 also boasts 2XP technology to further boost the vehicle-to-cell tower range by increasing the uplink transmission power two-fold. With both ERT and 2XP working in unison N-Range 2.0 is the best performing cradle-style cell signal booster on the road.
  • SureCall RF Signal Meter

    Signal meter measures outdoor and indoor signal levels for LTE, AWS, PCS and Cellular frequencies for all cell carriers.
  • SureCall Expansion Kit Wall Panel

    SureCall Expansion Kit Wall Panel FUSION 5X 2.0
  • SureCall Expansion Kit Ceiling Dome

    SureCall Expansion Kit Ceiling Dome FUSION 5X 2.0
  • Improve your cell signal for all Canadian carriers inside any home, cottage, small building or office up to 3,500 square feet. Flare 3.0® takes the multi-award winning SureCall Flare model one step further to deliver even more cellular reliability to homes in remote areas. Flare 3.0 comes kitted with a Yagi-directional antenna and an average 9 dB increase in uplink power for the frequencies that are most commonly used in rural areas. Together, the increased uplink and upgraded antenna pack the Flare 3.0 with 8X more connecting power for homes and offices in the most challenging signal locations. Improves cell service for all Canadian carrier’s voice, text and 4G LTE data signals Increases signal strength & extends battery life for multiple users on all cellular devices, up to 3,000 sq ft Significantly improved uplink power and high-gain Yagi antenna for best performance in the toughest environments without sacrificing performance in urban locations Newly added gain expands indoor cell coverage for those located at the edge of the network Simple to set up with all components included for a light DIY install Industry best 3-year warranty and lifetime US-based tech support
  • Voice, Text & 4G LTE Cell Phone Signal Booster for Homes up to 3,500 sq ft

    Improve your cell signal for all Canadian carriers inside any home, cottage, small building or office up to 3,500 square feet. Flare 3.0® takes the multi-award winning SureCall Flare model one step further to deliver even more cellular reliability to homes in remote areas. Flare 3.0 comes kitted with a Yagi-directional antenna and an average 9 dB increase in uplink power for the frequencies that are most commonly used in rural areas. Together, the increased uplink and upgraded antenna pack the Flare 3.0 with 8X more connecting power for homes and offices in the most challenging signal locations.
  • Voice, Text & 4G LTE Mobile Cell Phone Signal Booster for Vehicles

    “If you are regularly traveling in places where you get a lot of dropped calls, this thing is going to help out a lot. It’s going to allow you to stay on the phone, stay connected, maybe get some work done while you’re on the road.” -Outside Magazine
    Stay connected with reliable voice, text & 4G LTE data on the road with the Fusion2Go 3.0, a popular amplifier which offers the best gain and power for a cell phone signal booster designed for the car, truck or SUV.
Go to Top