ICOM IP501M Speaker Microphone.
-
General Frequency coverage F9511S/T/HT 136–174MHzF9521S/T 400-470MHz 450-512MHzNumber of channels Max. 512 channels/ 128 zones Power supply requirement 13.6V DC nominal Current drain (approx.) 50W Version Tx High (50W) 11..0A/14.0A (VHF/UHF) Rx Max. Audio 1000mA Stand-by 350mA 110W Version Tx High (110W) 22.0A Rx Max. Audio 3.0A Stand-by 400mA Operating temperature range –30°C to +60°C; –22°F to +140°F Antenna impedance 50Ω (SO-239) Dimensions (W×H×D) 175×45×170mm; 67⁄8×125⁄32×611⁄16in Weight 50W 110W 1.5kg; 3.3lb 1.5kg; 3.3lb Rated output power 50W/110W Channel spacing 15/30 kHz (VHF), 12.5 kHz (UHF) (analog) 12.5 kHz (digital) Transmitter Output power 50W, 25W, 5.0W Max. frequency deviation Maximum pattern Minimum pattern ±5.0/2.5 kHz (Wide/Narrow) ±2.85 kHz (Digital) ±0.95 kHz (Digital) Frequency error ±1.0ppm Spurious emissions 70dB min. Adjacent channel power 70/60dB min (wide/Narrow) 67dB min. (Digital) FM hum and noise 48/45dB typ. (VHF, Wide/Narrow) 48/43dB typ. (UHF, Wide/Narrow) Audio harmonic distortion 3% typ. (40% deviation) External microphone impedance 600Ω (8-pin modular) Receiver Sensitivity Analog Digital 0.25μV typ. (at 12dB SINAD) 0.25μV typ. (at 5% BER) Squelch sensitivity 0.25μV typ. (at threshold) Adjacent Ch. selectivity Analog (TIA/EIA603B) (TIA/EIA603) Digital 81/53dB typ. (VHF, Wide/Narrow) 79/53dB typ. (UHF, Wide/Narrow) 63dB typ. Spurious response 85dB min. (VHF) 70dB* min. (UHF) *85dB min (406. 1-420 MHz) Intermodulation 78dB typ. Audio output power 50W External audio (D-sub) 110W External audio (D-sub) 1.0W typ. at 10% distortion with a 8Ω load 4W typ. 22W typ. at 10% distortion with a 4Ω load Hum and noise ratio 55/51dB typ. (VHF, Wide/Narrow) 30/45dB typ. (UHF, Wide/Narrow) 52dB typ. (Digital) External speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/4Ω Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and ingress protection standards.
Also meets equivalent MIL-STD-810-C, -D, -E and -FStandard MIL 810 G Method Proc Low Pressure 500.5 I, II High Temperature 501.5 I, II Low Temperature 502.5 I, II Temperature Shock 503.5 I Solar Radiation 505.5 I Humidity 507.5 – Salt fog 509.5 – Dust Blowing 510.5 I Vibration 514.6 I Shock 516.6 I, IV Ingress Protection Standard Dust & Water IP54* (Dust-protection and water resistant) -
The M605 is not just a radio. It’s a system that allows the user choices on how to set up the radio with up to three stations. Boaters can now add an exclusive complete display as another station on the vessel along with two COMMANDMICS™. Customers will appreciate the radios large bright display that includes night mode to view easily in the dark. The full featured M605 also gives customers the option of the radio with an integrated AIS receiver. The best just got better!
