Large Buildings & Industrial Cellular Signal Boosters
STOP DROPPED CALLS. IMPROVE CALL QUALITY.
Get cell and data signals up to 32x stronger, and enjoy more bars in your home, office, or vehicle.
Mobile
Cel-Fi QUATRA 1000 (CU) Coverage Unit 100dB Gain for Band 2/4/5/12
100dB Gain for Band 2/4/5/12
Cel-Fi Quatra 1000
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague occupants in middleprise buildings. Cel-Fi QUATRA is an Active DAS Hybrid that solves this problem. It is an affordable, all-digital solution. It provides uniform, high quality cellular signal throughout a building, and is scalable to the size needed. Cel-FI QUATRA is carrier approved and guaranteed network safe. Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger, utilizing CAT 5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. Cel-Fi QUATRA can be installed in just days (compared to months typical of other solutions), and at a price point that meets the middleprise budget.
Description
Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
- Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
- Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
- Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
- Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
- Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
- All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
- Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
- Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
- Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
Cel-Fi WAVE Portal
- Cel-Fi device and asset management
- Data modeling and reporting
- Mobile and computer applications
- Globally trusted carrier-grade security
- Users can access the Cel-Fi WAVE Platform portal through the dashboard interface, or integrate it via APIs.
Request Portal Access: https://cel-fi.com/account-request/
Additional information
| Manufacturer |
|---|
Related products
CEL-FI QUATRA 2000 w/4 x (CU), 100dB Gain for Bands 2/4/5/12/13/25. Band 66 Config.
Cel-Fi Quatra 2000
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, Cel-Fi QUATRA 2000 is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe.
Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes Cat5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).
Features:
The Cel-Fi QUATRA Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power-Over-Ethernet (POE) for up to four CUs.
The QUATRA CU:
- Provides coverage for the QUATRA system (up to four per Network Unit)
- Power is delivered by Power-Over-Ethernet from the Network Unit
- Self-configuring and self-optimizing
- Note: QUATRA 2000 CU’s are only compatible with QUATRA 2000 NU’s
Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
- Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
- Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
- Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
- Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
- Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
- All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
- Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
- Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
- Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
Description
Cel-Fi Quatra 2000
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, Cel-Fi QUATRA 2000 is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe.
Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes Cat5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).
Features:
The Cel-Fi QUATRA Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power-Over-Ethernet (POE) for up to four CUs.
The QUATRA CU:
- Provides coverage for the QUATRA system (up to four per Network Unit)
- Power is delivered by Power-Over-Ethernet from the Network Unit
- Self-configuring and self-optimizing
- Note: QUATRA 2000 CU’s are only compatible with QUATRA 2000 NU’s
Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
- Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
- Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
- Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
- Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
- Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
- All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
- Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
- Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
- Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
Cel-Fi WAVE Portal
- Cel-Fi device and asset management
- Data modeling and reporting
- Mobile and computer applications
- Globally trusted carrier-grade security
- Users can access the Cel-Fi WAVE Platform portal through the dashboard interface, or integrate it via APIs.
Request Portal Access: https://cel-fi.com/account-request/
Downloads:
Additional information
| Manufacturer |
|---|
Related products
CEL-FI QUATRA 2000 (NU),100dB Gain for Band 2/4/5/12/13/25. Band 66 Config.
Cel-Fi Quatra 2000
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, Cel-Fi QUATRA 2000 is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe.
Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes Cat5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).
Features:
The QUATRA Network Unit (NU) is the hub of the system. The scalable design works with one to four Coverage Units to provide up to 50,000 ft2 (5,000 m2) of coverage.
The QUATRA NU:
- Provides a donor signal to the QUATRA system
- Provides power to the Coverage Units (up to four)
- Connects to the Cel-Fi WAVE cloud platform for remote monitoring and management
- QUATRA 2000 supports a dual carriers
- Supports Band 2/4/5/12/13/25, Band 66 is configurable
Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
- Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
- Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
- Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
- Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
- Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
- All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
- Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
- Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
- Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
Description
Cel-Fi Quatra 2000
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague employees and visitors in middleprise buildings. To solve that problem, Cel-Fi QUATRA 2000 is an affordable, all-digital active DAS hybrid solution that provides uniform, high quality cellular signal throughout any building. This industry-leading system is also carrier approved and guaranteed network safe.
Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger. The system utilizes Cat5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. In addition to being the most powerful solution on the market, QUATRA is cost-effective and designed to be installed within days (compared to months typical of other solutions).
Features:
The QUATRA Network Unit (NU) is the hub of the system. The scalable design works with one to four Coverage Units to provide up to 50,000 ft2 (5,000 m2) of coverage.
The QUATRA NU:
- Provides a donor signal to the QUATRA system
- Provides power to the Coverage Units (up to four)
- Connects to the Cel-Fi WAVE cloud platform for remote monitoring and management
- QUATRA 2000 supports a dual carriers
- Supports Band 2/4/5/12/13/25, Band 66 is configurable
Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.
- Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
- Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
- Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
- Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
- Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
- All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
- Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
- Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
- Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
Cel-Fi WAVE Portal
- Cel-Fi device and asset management
- Data modeling and reporting
- Mobile and computer applications
- Globally trusted carrier-grade security
- Users can access the Cel-Fi WAVE Platform portal through the dashboard interface, or integrate it via APIs.
Request Portal Access: https://cel-fi.com/account-request/
Downloads:
Additional information
| Manufacturer |
|---|
Related products
CEL-FI QUATRA 1000/2000 Range Extender QRE Module
Cel-Fi QUATRA 1000/2000 Range Extender QRE Module
Cel-Fi QUATRA Range Extender is a Power over Ethernet (PoE) device that extends the maximum cable distance between the NU and the CU.
- Extend 100 Meters with CAT5
- Extend 150 Meters with CAT6
Downloads
Description
Cel-Fi QUATRA 1000/2000 Range Extender QRE Module
Cel-Fi QUATRA Range Extender is a Power over Ethernet (PoE) device that extends the maximum cable distance between the NU and the CU.
- Extend 100 Meters with CAT5
- Extend 150 Meters with CAT6
Downloads
Additional information
| Manufacturer |
|---|
Related products
QUATRA EVO (NU) Network Unit,100dB gain for Bands 2/4/5/12/13/25
CEL-FI QUATRA EVO
In-Building Cellular Coverage Solution
CEL-FI QUATRA EVO represents the ultimate solution for addressing the cellular coverage challenges encountered in enterprise environments. It operates as an active DAS hybrid, ensuring a seamless, high-quality cellular signal throughout any building. Distinguished by its all-digital approach, QUATRA EVO leverages category cabling and Power-over-Ethernet architecture, delivering unparalleled signal amplification and scalability that set industry standards.
Furthermore, this cost-effective, carrier-grade system offers the advantage of fiber expansion capabilities, enabling effortless expansion of your coverage area. Remarkably, QUATRA EVO can be swiftly installed within days, minimizing downtime. Moreover, it boasts carrier approval and guarantees network safety without compromise.
Features and benefits include:
- Scalable all-digital active DAS hybrid for enterprise environments
- Flexible to configure for single or dual operator server application
- Multi-carrier signal booster for 3G, 4G, and 5G with industry-leading signal gain up to 100 dB
- Carrier approved and unconditionally network safe
- Lossless RF signal and Power-over-Ethernet (PoE) distribution with easy-to-install category cable architecture
- Site installation flexibility with operator specific donor antenna or small cell signal source
- Remotely monitor and configure with Nextivity WAVE Portal cloud management
QUATRA EVO Network Unit
The Network Unit (NU) is the hub of the system. Each NU works with one to six Coverage Units (CU) for maximum scalability and design flexibility.
- Receives donor signal(s) for the system
- Provides power and distributes donor signal(s) to CUs (up to six)
- Connects via Ethernet or LTE Modem to the Nextivity WAVE Platform for remote monitoring and management
Coverage Made Easy
This one or two operator / two-port solution has many of the features of our flagship, four-port QUATRA 4000 systems including:
- Scalable all-digital architecture
- Flexible configuration
- IntelliBoost technology with the best echo cancellation, gain, and coverage footprint in the industry
- 3G/4G/5G
- Support for up to Six (6) Coverage Units (CUs)
- Compatability with optional fiber hub for even more coverage options (up to 12 CUs)
- Use of category cabling and PoE
- Hassle-free installation with minimal disruption to operations
Description
CEL-FI QUATRA EVO
In-Building Cellular Coverage Solution
CEL-FI QUATRA EVO represents the ultimate solution for addressing the cellular coverage challenges encountered in enterprise environments. It operates as an active DAS hybrid, ensuring a seamless, high-quality cellular signal throughout any building. Distinguished by its all-digital approach, QUATRA EVO leverages category cabling and Power-over-Ethernet architecture, delivering unparalleled signal amplification and scalability that set industry standards.
Furthermore, this cost-effective, carrier-grade system offers the advantage of fiber expansion capabilities, enabling effortless expansion of your coverage area. Remarkably, QUATRA EVO can be swiftly installed within days, minimizing downtime. Moreover, it boasts carrier approval and guarantees network safety without compromise.
Features and benefits include:
- Scalable all-digital active DAS hybrid for enterprise environments
- Flexible to configure for single or dual operator server application
- Multi-carrier signal booster for 3G, 4G, and 5G with industry-leading signal gain up to 100 dB
- Carrier approved and unconditionally network safe
- Lossless RF signal and Power-over-Ethernet (PoE) distribution with easy-to-install category cable architecture
- Site installation flexibility with operator specific donor antenna or small cell signal source
- Remotely monitor and configure with Nextivity WAVE Portal cloud management
QUATRA EVO Network Unit
The Network Unit (NU) is the hub of the system. Each NU works with one to six Coverage Units (CU) for maximum scalability and design flexibility.
- Receives donor signal(s) for the system
- Provides power and distributes donor signal(s) to CUs (up to six)
- Connects via Ethernet or LTE Modem to the Nextivity WAVE Platform for remote monitoring and management
Coverage Made Easy
This one or two operator / two-port solution has many of the features of our flagship, four-port QUATRA 4000 systems including:
- Scalable all-digital architecture
- Flexible configuration
- IntelliBoost technology with the best echo cancellation, gain, and coverage footprint in the industry
- 3G/4G/5G
- Support for up to Six (6) Coverage Units (CUs)
- Compatability with optional fiber hub for even more coverage options (up to 12 CUs)
- Use of category cabling and PoE
- Hassle-free installation with minimal disruption to operations
Two Configurable Ports
Single-operator Mode
In single-operator mode, connect a single donor signal to both ports to support four bands from same carrier.
Dual-operator Mode
In dual-operator mode, connect a different donor antenna to each port to support two bands from each operator.
Either mode will provide full, reliable coverage throughout the building. Proprietary technology ensures devices are connected to the best available operator bands to provide optimal connectivity for end users.
Additional information
| Manufacturer |
|---|
Related products
QUATRA EVO (CU) Coverage Unit, 100dB Gain for Bands 2/4/5/12/13/25
CEL-FI QUATRA EVO
In-Building Cellular Coverage Solution
CEL-FI QUATRA EVO represents the ultimate solution for addressing the cellular coverage challenges encountered in enterprise environments. It operates as an active DAS hybrid, ensuring a seamless, high-quality cellular signal throughout any building. Distinguished by its all-digital approach, QUATRA EVO leverages category cabling and Power-over-Ethernet architecture, delivering unparalleled signal amplification and scalability that set industry standards.
Furthermore, this cost-effective, carrier-grade system offers the advantage of fiber expansion capabilities, enabling effortless expansion of your coverage area. Remarkably, QUATRA EVO can be swiftly installed within days, minimizing downtime. Moreover, it boasts carrier approval and guarantees network safety without compromise.
Features and benefits include:
- Scalable all-digital active DAS hybrid for enterprise environments
- Flexible to configure for single or dual operator server application
- Multi-carrier signal booster for 3G, 4G, and 5G with industry-leading signal gain up to 100 dB
- Carrier approved and unconditionally network safe
- Lossless RF signal and Power-over-Ethernet (PoE) distribution with easy-to-install category cable architecture
- Site installation flexibility with operator specific donor antenna or small cell signal source
- Remotely monitor and configure with Nextivity WAVE Portal cloud management
QUATRA EVO Coverage Unit
The Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power over Ethernet (PoE) for up to six CUs.
- Distributes signal across the coverage area inside the building (up to six per Network Unit)
- Power delivered by Power Over Ethernet from the NU
- Self-configuring and self-optimizing
- CEL-FI QUATRA EVO CU is only compatible with CEL-FI QUATRA EVO NU
Coverage Made Easy
This one or two operator / two-port solution has many of the features of our flagship, four-port QUATRA 4000 systems including:
- Scalable all-digital architecture
- Flexible configuration
- IntelliBoost technology with the best echo cancellation, gain, and coverage footprint in the industry
- 3G/4G/5G
- Support for up to Six (6) Coverage Units (CUs)
- Compatability with optional fiber hub for even more coverage options (up to 12 CUs)
- Use of category cabling and PoE
- Hassle-free installation with minimal disruption to operations
Description
CEL-FI QUATRA EVO
In-Building Cellular Coverage Solution
CEL-FI QUATRA EVO represents the ultimate solution for addressing the cellular coverage challenges encountered in enterprise environments. It operates as an active DAS hybrid, ensuring a seamless, high-quality cellular signal throughout any building. Distinguished by its all-digital approach, QUATRA EVO leverages category cabling and Power-over-Ethernet architecture, delivering unparalleled signal amplification and scalability that set industry standards.
Furthermore, this cost-effective, carrier-grade system offers the advantage of fiber expansion capabilities, enabling effortless expansion of your coverage area. Remarkably, QUATRA EVO can be swiftly installed within days, minimizing downtime. Moreover, it boasts carrier approval and guarantees network safety without compromise.
Features and benefits include:
- Scalable all-digital active DAS hybrid for enterprise environments
- Flexible to configure for single or dual operator server application
- Multi-carrier signal booster for 3G, 4G, and 5G with industry-leading signal gain up to 100 dB
- Carrier approved and unconditionally network safe
- Lossless RF signal and Power-over-Ethernet (PoE) distribution with easy-to-install category cable architecture
- Site installation flexibility with operator specific donor antenna or small cell signal source
- Remotely monitor and configure with Nextivity WAVE Portal cloud management
QUATRA EVO Coverage Unit
The Coverage Unit (CU) is the remote unit of the system that rebroadcasts the donor signal. The cost efficient and easy-to-deploy system leverages Power over Ethernet (PoE) for up to six CUs.
- Distributes signal across the coverage area inside the building (up to six per Network Unit)
- Power delivered by Power Over Ethernet from the NU
- Self-configuring and self-optimizing
- CEL-FI QUATRA EVO CU is only compatible with CEL-FI QUATRA EVO NU
Coverage Made Easy
This one or two operator / two-port solution has many of the features of our flagship, four-port QUATRA 4000 systems including:
- Scalable all-digital architecture
- Flexible configuration
- IntelliBoost technology with the best echo cancellation, gain, and coverage footprint in the industry
- 3G/4G/5G
- Support for up to Six (6) Coverage Units (CUs)
- Compatability with optional fiber hub for even more coverage options (up to 12 CUs)
- Use of category cabling and PoE
- Hassle-free installation with minimal disruption to operations
Two Configurable Ports
Single-operator Mode
In single-operator mode, connect a single donor signal to both ports to support four bands from same carrier.
Dual-operator Mode
In dual-operator mode, connect a different donor antenna to each port to support two bands from each operator.
Either mode will provide full, reliable coverage throughout the building. Proprietary technology ensures devices are connected to the best available operator bands to provide optimal connectivity for end users.
Additional information
| Manufacturer |
|---|
Related products
Cel-Fi GO XD2 with 2 Wideband Dome Antennas
$1,800.00
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
Description
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
Please note that the Cel-Fi GO X can only boost signal for one network at a time. If you have users on multiple networks in your building, you may need a multi-carrier booster or multiple GO X devices.
Cel-Fi WAVE Mobile App
The GO X can be easily optimized and monitored by the Cel-Fi WAVE application for iOS and Android devices. Cel-Fi’s mobile app allows you to connect to the device over bluetooth and see detailed diagnostic information, including measures of signal strength (RSRP), gain, and signal quality (SINR).
Coverage Area
As with all signal booster kits, the coverage area of the Cel-Fi unit depends on two factors:
- The number of indoor antennas you pair it with
- The signal strength at the location where the outdoor “donor” antenna is installed.
It has potential to cover up to 100,000 sq ft of open coverage area combined with sector antenna setup.
KIT CONTENTS
Cel-Fi GO-XD2 Booster Kit. Includes 100dB Gain Booster, 2 x Ceiling Dome Antennas & Wide Band Directional Antenna, 50′, 30′ (2) & 2′ Black FLEXPRO 400 Cable, 2′ SMA Male-N Female RG58 Cables (qty 2), 110-240 3A AC/DC Power Supply and 10″ Mounting Pipe. Cover up to 15,000 Sq. ft.
Sample Layouts
One Level Two Level Multi-Level
Cel-Fi GO X Bundles
Cel-Fi GO X bundles, with four different configurations, can be installed indoors or outdoors for 100 dB signal gain in areas up to 15,000 sq. ft. per system. The bundles include either Cel-Fi Omni Dome Antenna(s) for ceiling mount or Cel-Fi Wideband Panel Antenna(s) for wall mount, and include the Cel-Fi Wideband Directional Donor Antenna. Additional server antennas are available for venues with more floors or dense interior walls. For areas that suffer from extremely poor outdoor signal, the new high gain Cel-Fi LPDA Antenna is available.
Additional information
| Manufacturer |
|---|
Related products
Cel-Fi GO XP2 with 2 Wideband Panel Antennas
$1,799.00
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
Description
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
Please note that the Cel-Fi GO X can only boost signal for one network at a time. If you have users on multiple networks in your building, you may need a multi-carrier booster or multiple GO X devices.
Cel-Fi WAVE Mobile App
The GO X can be easily optimized and monitored by the Cel-Fi WAVE application for iOS and Android devices. Cel-Fi’s mobile app allows you to connect to the device over bluetooth and see detailed diagnostic information, including measures of signal strength (RSRP), gain, and signal quality (SINR).
Coverage Area
As with all signal booster kits, the coverage area of the Cel-Fi unit depends on two factors:
- The number of indoor antennas you pair it with
- The signal strength at the location where the outdoor “donor” antenna is installed.
It has potential to cover up to 100,000 sq ft of open coverage area combined with sector antenna setup.
KIT CONTENTS
Cel-Fi GO-XP2 Booster Kit. Includes 100dB Gain Booster, 2 x Wall Panel Antennas & Wide Band Directional Antenna, 50′, 30′ (2) & 2′ Black FLEXPRO 400 Cable, 2′ SMA Male-N Female RG58 Cables (qty 2), 110-240 3A AC/DC Power Supply and 10″ Mounting Pipe. Cover up to 15,000 Sq. ft.
Cel-Fi GO X Bundles
Cel-Fi GO X bundles, with four different configurations, can be installed indoors or outdoors for 100 dB signal gain in areas up to 15,000 sq. ft. per system. The bundles include either Cel-Fi Omni Dome Antenna(s) for ceiling mount or Cel-Fi Wideband Panel Antenna(s) for wall mount, and include the Cel-Fi Wideband Directional Donor Antenna. Additional server antennas are available for venues with more floors or dense interior walls. For areas that suffer from extremely poor outdoor signal, the new high gain Cel-Fi LPDA Antenna is available.
Additional information
| Manufacturer |
|---|
Related products
CEL-FI PRO
$1,199.00
Cel-Fi PRO Smart Signal Booster
NEXTIVITY’S 3RD GENERATION Cel-Fi SYSTEM adds substantial capability over our previous versions. The Cel-Fi PRO is designed to dramatically improve voice and data coverage in up to four bands for 3G, 4G and LTE for consumers while significantly improving network capacity. Good things do come in small packages: Now with LTE support, Cel-Fi is compatible with the highest data services application available. All new patented echo cancellation algorithms enable Cel-Fi to offer even higher signal levels throughout the coverage area than before.
Benefits:
- Has Improved Voice Coverage. Enables clear and reliable voice connections within the coverage area —13,000 Sq. Ft.
- Has Improved Data Throughput. For indoor areas with poor reception, Cel-Fi offers significant data throughput improvements for HSPA+ or LTE — often achieving a 4x improvement.
- Has Improved Battery Life. Cel-Fi manages the power levels between the cell tower and user devices so that subscriber devices enjoy significant improvements in battery life.
- Extremely easy to install. Cel-Fi is a true “Plug and Play” system that doesn’t require the installation of external antennas, bulky coaxial cables or a configuration set-up by the subscriber. In fact, Cel-Fi intelligently and automatically senses and adapts to its environment — including changes made by the Operator or those caused by nearby user equipment like WiFi, or other Cel-Fi devices.
- Reduced Churn. Fewer dropped calls and higher data rates help ensure customer retention.
- Higher Data Service Usage. By supporting advanced multi-carrier features, the third generation Cel-Fi system ensures that customers can maximize their data rates.
- Decreased Operational Cost. Lowers cost of indoor coverage and increases capacity of WCDMA and LTE networks.
- Network Safe. Cel-Fi’s embedded System-On-a-Chip technology provides real-time and automatic end-to-end gain control, thus guaranteeing it will complement the existing macro network’s capabilities.
- Operator Specific. Cel-Fi’s On-Board IntelliBoost processor securely manages the enhanced services only for the Operator who authorized the system.
- Self Adjusting. Cel-Fi automatically selects the correct frequencies for use based on channel frequency and Operator PLMNID codes, thereby eliminating additional and costly Operator provisioning efforts.
- Multi Technology Support. The Cel-Fi PRO can support both WCDMA and LTE across four different cellular bands in the same system.
- Multi Carrier Support. The Cel-Fi PRO system simultaneously supports multiple carriers with bandwidths anywhere from 5 to 20 MHz with a total system bandwidth of 35 MHz.
Cel-Fi Features:
- Fully wireless, plug-and-play quad-band architecture for supporting—WCDMA/HSPA+/ LTE, with up to 100dB of system gain in each band simultaneously.
- Patented 2-unit, 3-hop system allows flexible placement for optimal coverage.
- Processor running advanced digital echo cancellation and channel select filtering algorithm.
- Software-based optimization of integrated antenna coverage pattern which maximizes system gain and provides improved coverage and signal quality.
- Automatic Gain Control (AGC) continuously monitors system path loss and transmit power to deliver maximum gain.
- Intuitive LCD User Interface (UI) allows quick and easy installation by end-user.
- Cel-Fi PRO External Antenna Connector SMA-Female (EXA) variants feature an external antenna connector to enable the use of an external Donor antenna. A Cel-Fi PRO EXA with an external Donor antenna can thereby acquire an outside signal, allowing it to be used in applications where no signal is present indoors (i.e. cement, metal walls, etc.). This opens up new opportunities for using Cel-Fi PRO Smart Boosters when other solutions fail.
- Cel-Fi PRO EXA enables cellular coverage in hard to reach places by allowing the Cel-Fi Network Unit to be placed, where no service exists.
High-Level Specifications:
- Support for 3GPP HSPA Rel. 10 features and 3GPP LTE Release 10 Features
- 5GHz link compliant with FCC Part 15 and EN 301 893
- Up to 100dB path loss between units (approximately 20 meters between NU and CU) • Max EIRP for Multiple carriers: 16dBm downlink & 24dBm uplink
- Auto-Configuring “All band scanning” feature to self adjust as Network channels change
- Multiple band configurations available. Check with our Sales rep for details.
Cel-Fi WAVE Mobile App
The GO M is supported by Cel-Fi’s unique WAVE platform. Cel-Fi WAVE is a smartphone app that will help you get the best performance from your Cel-Fi GO M. The WAVE app is available for iOS and Android. The WAVE provides a User Interface to Cel-Fi systems. The app’s dashboard shows the system “Boost” value. It allows you to monitor signal gain the GO M is providing.
Benefits
- 3G / 4G / LTE Voice and Data
- Mobile Coverage for cars, trucks, RVs, and boats
- Multi-Carrier Support with Carrier Switching
- Indoor / Outdoor NEMA 4 Rated
- Network Safe
- Smartphone App for Optimizing Performance
Description
Cel-Fi PRO Smart Signal Booster
NEXTIVITY’S 3RD GENERATION Cel-Fi SYSTEM adds substantial capability over our previous versions. The Cel-Fi PRO is designed to dramatically improve voice and data coverage in up to four bands for 3G, 4G and LTE for consumers while significantly improving network capacity. Good things do come in small packages: Now with LTE support, Cel-Fi is compatible with the highest data services application available. All new patented echo cancellation algorithms enable Cel-Fi to offer even higher signal levels throughout the coverage area than before.
Benefits:
- Has Improved Voice Coverage. Enables clear and reliable voice connections within the coverage area —13,000 Sq. Ft.
- Has Improved Data Throughput. For indoor areas with poor reception, Cel-Fi offers significant data throughput improvements for HSPA+ or LTE — often achieving a 4x improvement.
- Has Improved Battery Life. Cel-Fi manages the power levels between the cell tower and user devices so that subscriber devices enjoy significant improvements in battery life.
- Extremely easy to install. Cel-Fi is a true “Plug and Play” system that doesn’t require the installation of external antennas, bulky coaxial cables or a configuration set-up by the subscriber. In fact, Cel-Fi intelligently and automatically senses and adapts to its environment — including changes made by the Operator or those caused by nearby user equipment like WiFi, or other Cel-Fi devices.
- Reduced Churn. Fewer dropped calls and higher data rates help ensure customer retention.
- Higher Data Service Usage. By supporting advanced multi-carrier features, the third generation Cel-Fi system ensures that customers can maximize their data rates.
- Decreased Operational Cost. Lowers cost of indoor coverage and increases capacity of WCDMA and LTE networks.
- Network Safe. Cel-Fi’s embedded System-On-a-Chip technology provides real-time and automatic end-to-end gain control, thus guaranteeing it will complement the existing macro network’s capabilities.
- Operator Specific. Cel-Fi’s On-Board IntelliBoost processor securely manages the enhanced services only for the Operator who authorized the system.
- Self Adjusting. Cel-Fi automatically selects the correct frequencies for use based on channel frequency and Operator PLMNID codes, thereby eliminating additional and costly Operator provisioning efforts.
- Multi Technology Support. The Cel-Fi PRO can support both WCDMA and LTE across four different cellular bands in the same system.
- Multi Carrier Support. The Cel-Fi PRO system simultaneously supports multiple carriers with bandwidths anywhere from 5 to 20 MHz with a total system bandwidth of 35 MHz.
Cel-Fi Features:
- Fully wireless, plug-and-play quad-band architecture for supporting—WCDMA/HSPA+/ LTE, with up to 100dB of system gain in each band simultaneously.
- Patented 2-unit, 3-hop system allows flexible placement for optimal coverage.
- Processor running advanced digital echo cancellation and channel select filtering algorithm.
- Software-based optimization of integrated antenna coverage pattern which maximizes system gain and provides improved coverage and signal quality.
- Automatic Gain Control (AGC) continuously monitors system path loss and transmit power to deliver maximum gain.
- Intuitive LCD User Interface (UI) allows quick and easy installation by end-user.
- Cel-Fi PRO External Antenna Connector SMA-Female (EXA) variants feature an external antenna connector to enable the use of an external Donor antenna. A Cel-Fi PRO EXA with an external Donor antenna can thereby acquire an outside signal, allowing it to be used in applications where no signal is present indoors (i.e. cement, metal walls, etc.). This opens up new opportunities for using Cel-Fi PRO Smart Boosters when other solutions fail.
- Cel-Fi PRO EXA enables cellular coverage in hard to reach places by allowing the Cel-Fi Network Unit to be placed, where no service exists.
High-Level Specifications:
- Support for 3GPP HSPA Rel. 10 features and 3GPP LTE Release 10 Features
- 5GHz link compliant with FCC Part 15 and EN 301 893
- Up to 100dB path loss between units (approximately 20 meters between NU and CU) • Max EIRP for Multiple carriers: 16dBm downlink & 24dBm uplink
- Auto-Configuring “All band scanning” feature to self adjust as Network channels change
- Multiple band configurations available. Check with our Sales rep for details.
Cel-Fi WAVE Mobile App
The GO M is supported by Cel-Fi’s unique WAVE platform. Cel-Fi WAVE is a smartphone app that will help you get the best performance from your Cel-Fi GO M. The WAVE app is available for iOS and Android. The WAVE provides a User Interface to Cel-Fi systems. The app’s dashboard shows the system “Boost” value. It allows you to monitor signal gain the GO M is providing.
Benefits
- 3G / 4G / LTE Voice and Data
- Mobile Coverage for cars, trucks, RVs, and boats
- Multi-Carrier Support with Carrier Switching
- Indoor / Outdoor NEMA 4 Rated
- Network Safe
- Smartphone App for Optimizing Performance
Downloads:
Additional information
| Manufacturer |
|---|
Related products
SureCall - Fusion5X 2.0 Canada
$1,699.99
Voice, Text & 4G LTE Cell Phone Signal Booster for Large Residences and Mid-Sized Commercial Buildings
Designed for mid-sized commercial buildings and large residences, Fusion5X 2.0™ increases voice, text and 4G LTE signals for all Canadian cell carriers and mobile devices. Configurable for all indoor environments, Fusion5X 2.0 reduces dropped & missed calls and improves 4G LTE data speeds to ensure everyone has a reliable connection to their mobile device.
Fusion5X 2.0 is the industry’s most powerful cellular signal booster in its class, covering up to 2X more area than the closest competitor. Its the chosen solution for mid- to large-size applications that need access to reliable voice, text, and data signals.
Description
Maximum Coverage Area: +16 dBm downlink power for 2X more coverage area than the closest competitor.
SureIQ™ Technology balances incoming signals, preventing shutdown and maximizing performance in strong signal environments.
Remote Monitoring: Fusion5X 2.0 is compatible with SureCall Sentry™ which allows users and installers to monitor the booster’s performance, set up alert notifications via the app and adjust settings from anywhere, anytime.
24/7 Peak Performance: Auto-adjusting gain and SureIQ work together to ensure 24/7 uptime at peak performance.
- Boosts voice, text and 4G LTE signals for all Canadian cell carriers
- Reduces dropped & missed calls and extends battery life for all cellular devices
- Multiple kitting options offer the flexibility to customize installation in any building or floor plan
- Industry best 3-year warranty and lifetime US-based tech support
Customer Support
Back Guarantee
| Uplink Frequency Range (MHz): | 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included) |
| Downlink Frequency Range (MHz): | 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included) |
| Supported Standards: | CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards |
| Input/Output Impedance: | 50 Ohm |
| Maximum Gain: | 72 dB |
| Noise Figure: | 8 dB |
| VSWR: | ≤2.0 |
| AC Input: | Input AC 110 V, 60 Hz / Output DC 12 V |
| Maximum Output Power: | 1 Watt EIRP |
| Downlink Power: | +16 dBm |
| Cable: | SC-400 |
| RF Connectors: | N-Female (both ends) |
| Power Consumption: | <25W |
| Operating Temperature: | -4ºF to +158ºF |
| Dimensions: | 9.25" x 6.375" x 1.375" |
| Weight: | 4 lb 4 oz |
Additional information
| Manufacturer |
|---|
Related products
SureCall - Fusion5s CA
$1,800.00
Voice, Text & 4G LTE Cell Phone Signal Booster for Large Buildings up to 35,000 sq ft
Fusion5s™ CA cell phone signal booster increases signal strength for voice, text and 4G LTE data for all Canadian cell carriers. Fusion5s CA covers up to 35,000 sq ft and delivers unrivaled performance with cutting-edge technology, reducing dropped and missed calls and extending battery life for 20+ multiple simultaneous users on all cellular networks.
The Fusion5s CA booster features sturdy metal construction and an industry leading 3-year warranty. Dropped calls are history, as the Fusion5s provides clear and consistent coverage for all cellular devices in a home or office.
Additional information
| Manufacturer |
|---|
Related products
SureCall FusionPro
$699.99
Stay connected with Fusion Professional, the most powerful cell phone signal booster for mid-size buildings that provides strong, reliable connections in areas up to 8,000 sq. ft. It significantly improves voice, text, 4G and LTE data speeds for all North American cell carriers with built-in 2XP technology that doubles uplink transmission power to maintain the cellular connection to the tower in the weakest signal environments. Assembled and tested in the USA with outstanding build quality, award-winning technologies, all-carrier compatibility, and world-class support, the Fusion Professional is the premier cell phone signal booster for the mid-size commercial buildings and large residences.
- Significantly improve cellular connectivity for all North American cell carriers inside any building, up to 8,000 sq ft
- Exclusive 2XP technology delivers twice the signal power to the tower when compared to the closest competitor to keep all devices connected in weak signal areas
- SureIQ balances incoming signals, ensuring 24/7 uptime and continuous peak performance in both urban and rural areas
- Highest system gain in its class combined with our strongest outdoor yagi antenna ensures constant connectivity in even the most challenging signal environments
- 5G compatible– Fusion Professional supports 4G & 5G phones and devices, including MiFi hotspots and cellular datahubs
- Designed, assembled and tested in the USA. FCC and IC-approved amplifiers built with the highest quality materials for longevity and connectivity when you need it most
- Includes 24/7 lifetime US-based tech support and 3-year manufacturer’s warranty
Description
Stay connected with Fusion Professional, the most powerful cell phone signal booster for mid-size buildings that provides strong, reliable connections in areas up to 8,000 sq. ft. It significantly improves voice, text, 4G and LTE data speeds for all North American cell carriers with built-in 2XP technology that doubles uplink transmission power to maintain the cellular connection to the tower in the weakest signal environments. Assembled and tested in the USA with outstanding build quality, award-winning technologies, all-carrier compatibility, and world-class support, the Fusion Professional is the premier cell phone signal booster for the mid-size commercial buildings and large residences.
- Significantly improve cellular connectivity for all North American cell carriers inside any building, up to 8,000 sq ft
- Exclusive 2XP technology delivers twice the signal power to the tower when compared to the closest competitor to keep all devices connected in weak signal areas
- SureIQ balances incoming signals, ensuring 24/7 uptime and continuous peak performance in both urban and rural areas
- Highest system gain in its class combined with our strongest outdoor yagi antenna ensures constant connectivity in even the most challenging signal environments
- 5G compatible– Fusion Professional supports 4G & 5G phones and devices, including MiFi hotspots and cellular datahubs
- Designed, assembled and tested in the USA. FCC and IC-approved amplifiers built with the highest quality materials for longevity and connectivity when you need it most
- Includes 24/7 lifetime US-based tech support and 3-year manufacturer’s warranty
KIT CONTENTS
SureCall 5 Band Booster Kit. Includes Booster 65dB Cellular, 72dB PCS, 71dB AWS/LTE, 64dB LTE (Band 17/12), 64dB LTE (Band 13), (2) N male Connectors, AC 6V Power Supply, 10/11dB Yagi Wide Band Antenna 50 Ohm, 50 Ohm panel antenna with 20′ SC240 and 50′ SC400 Coaxial Cable. Coverage up to 8,000 Sq. Feet.
Additional information
| Manufacturer |
|---|
Related products
SureCall - Force5 2.0 Canada
$6,999.00
Voice, Text & 4G LTE Cell Phone Signal Booster for Buildings up to 80,000 sq ft
Known as a wideband DAS solution, the 80dB SureCall Force5 2.0 Industrial BDA provides improved cellular coverage for large and enterprise buildings. The self-contained cell phone signal booster improves signal strength for all major North American cell carriers resulting in decreased dropped and missed calls and improved 4G LTE data performance.
Additionally, the Force5 2.0 Industrial comes equipped with built-in remote monitoring through SureCall's proprietary Sentry software and hardware. This allows integrators to optimize booster performance during installation and while located off-site using the Sentry mobile app or desktop portal.
Additional information
| Manufacturer |
|---|
Related products
weBoost Office 200 (50 Ohm)
$2,199.99
weBoost Office 200 is perfect for small to medium-sized businesses looking for a high-performance amplifier solution to improve cell signal in a commercial space. Office 200 provides reliable cell signal coverage for small businesses up to 35,000 square feet in ideal conditions. With Office 200, anyone who walks into your business will enjoy fewer dropped calls, uninterrupted texts, better voice quality, improved hotspot capability, faster internet speeds, better streaming, and more. To provide greater control and usability, Office 200 comes with a colour LCD touch screen, allowing users to troubleshoot, assess performance, and turn bands on and off. weBoost Office 200 is 5G compatible and improves cell signal on all Canadian carrier networks, including Bell, Rogers, Telus, and others. It’s the ideal solution for employees and customers who use a variety of carriers.
Description
weBoost Office 200 is perfect for small to medium-sized businesses looking for a high-performance amplifier solution to improve cell signal in a commercial space. Office 200 provides reliable cell signal coverage for small businesses up to 35,000 square feet in ideal conditions. With Office 200, anyone who walks into your business will enjoy fewer dropped calls, uninterrupted texts, better voice quality, improved hotspot capability, faster internet speeds, better streaming, and more. To provide greater control and usability, Office 200 comes with a colour LCD touch screen, allowing users to troubleshoot, assess performance, and turn bands on and off. weBoost Office 200 is 5G compatible and improves cell signal on all Canadian carrier networks, including Bell, Rogers, Telus, and others. It’s the ideal solution for employees and customers who use a variety of carriers.
Downloads:
Additional information
| Manufacturer |
|---|
Related products
weBoost Office 100 (50 Ohm)
$1,649.99
weBoost Office 100 is ideal for small business owners looking for a complete amplifier solution to improve cell signal. Office 100 improves cell signal coverage for small businesses up to 25,000 square feet in ideal conditions. Anyone who walks into your business will enjoy fewer dropped calls, uninterrupted texts, better voice quality, improved hotspot capability, faster internet speeds, better streaming, and more. weBoost Office 100 is 5G compatible and improves cell signal on all Canadian carrier networks, including Bell, Rogers, Telus, and others, making it an ideal solution for small business owners whose employees and customers utilize various carriers.
Description
weBoost Office 100 is ideal for small business owners looking for a complete amplifier solution to improve cell signal. Office 100 improves cell signal coverage for small businesses up to 25,000 square feet in ideal conditions. Anyone who walks into your business will enjoy fewer dropped calls, uninterrupted texts, better voice quality, improved hotspot capability, faster internet speeds, better streaming, and more. weBoost Office 100 is 5G compatible and improves cell signal on all Canadian carrier networks, including Bell, Rogers, Telus, and others, making it an ideal solution for small business owners whose employees and customers utilize various carriers.
Downloads:
Additional information
| Manufacturer |
|---|
Related products
SureCall Flare 3.0
$499.99
Improve your cell signal for all Canadian carriers inside any home, cottage, small building or office up to 3,500 square feet. Flare 3.0® takes the multi-award winning SureCall Flare model one step further to deliver even more cellular reliability to homes in remote areas.
Flare 3.0 comes kitted with a Yagi-directional antenna and an average 9 dB increase in uplink power for the frequencies that are most commonly used in rural areas. Together, the increased uplink and upgraded antenna pack the Flare 3.0 with 8X more connecting power for homes and offices in the most challenging signal locations.
Improves cell service for all Canadian carrier’s voice, text and 4G LTE data signals
Increases signal strength & extends battery life for multiple users on all cellular devices, up to 3,000 sq ft
Significantly improved uplink power and high-gain Yagi antenna for best performance in the toughest environments without sacrificing performance in urban locations
Newly added gain expands indoor cell coverage for those located at the edge of the network
Simple to set up with all components included for a light DIY install
Industry best 3-year warranty and lifetime US-based tech support
Description
Improve your cell signal for all Canadian carriers inside any home, cottage, small building or office up to 3,500 square feet. Flare 3.0® takes the multi-award winning SureCall Flare model one step further to deliver even more cellular reliability to homes in remote areas.
Flare 3.0 comes kitted with a Yagi-directional antenna and an average 9 dB increase in uplink power for the frequencies that are most commonly used in rural areas. Together, the increased uplink and upgraded antenna pack the Flare 3.0 with 8X more connecting power for homes and offices in the most challenging signal locations.
Improves cell service for all Canadian carrier’s voice, text and 4G LTE data signals
Increases signal strength & extends battery life for multiple users on all cellular devices, up to 3,000 sq ft
Significantly improved uplink power and high-gain Yagi antenna for best performance in the toughest environments without sacrificing performance in urban locations
Newly added gain expands indoor cell coverage for those located at the edge of the network
Simple to set up with all components included for a light DIY install
Industry best 3-year warranty and lifetime US-based tech support
HOW IT WORKS
Flare 3.0 has combined the booster and indoor antenna to streamline the system’s design for easier installation and an attractive, low-profile appearance. The stylish one-piece base unit is designed to be placed on an open tabletop or shelf for clearer and more reliable voice and data performance.
Signal is delivered to the Flare 3.0 booster with the included outdoor Yagi antenna and 50 feet of UPGRADED premium RG-11 cable. The outdoor antenna captures signal from the cell tower and the all-carrier booster amplifies it and distributes the enhanced signal to all mobile devices within the booster’s coverage area. Flare 3.0 then amplifies outgoing signal back to the cell tower.
KIT CONTENTS
Flare 3.0 indoor booster, high-gain Yagi antenna with mounting hardware, RG-11 cable (50 ft), AC power supply, quick setup guide
Additional information
| Manufacturer |
|---|
Related products
SureCall Fusion5x 2.0 Yagi W/Ultra-Thin Dome
$1,499.99
Designed for mid-sized commercial buildings and large residences, Fusion5X 2.0™ increases voice, text and 4G LTE signals for all North American cell carriers and devices. Configurable for all indoor environments, Fusion5X 2.0 reduces dropped & missed calls and improves 4G LTE data speeds to ensure everyone has a reliable connection to their mobile device.
Fusion5X 2.0 is the industry’s most powerful cellular signal booster in its class, covering up to 2X more area than the closest competitor. Its the chosen solution for mid- to large-size applications that need access to reliable voice, text, and data signals.
Maximum Coverage Area: +16 dBm downlink power for 2X more coverage area than the closest competitor.
SureIQ™ Technology balances incoming signals, preventing shutdown and maximizing performance in strong signal environments.
Remote Monitoring: Fusion5X 2.0 is compatible with SureCall Sentry™ which allows users and installers to monitor the booster’s performance, set up alert notifications via the mobile app and adjust settings from anywhere, anytime.
24/7 Peak Performance: Auto-adjusting gain and SureIQ work together to ensure 24/7 uptime at peak performance.
- Works with all North American carriers
- Compatible with all cellular devices, including hotspots, while extending their battery life
- 5G Phone Compatible – Boosts voice and 4G LTE data signals on 5G phones and devices
- Multiple kitting options offer the flexibility to customize installation in any building or floor plan
- Industry best 3-year warranty and lifetime US-based tech support
Description
Designed for mid-sized commercial buildings and large residences, Fusion5X 2.0™ increases voice, text and 4G LTE signals for all North American cell carriers and devices. Configurable for all indoor environments, Fusion5X 2.0 reduces dropped & missed calls and improves 4G LTE data speeds to ensure everyone has a reliable connection to their mobile device.
Fusion5X 2.0 is the industry’s most powerful cellular signal booster in its class, covering up to 2X more area than the closest competitor. Its the chosen solution for mid- to large-size applications that need access to reliable voice, text, and data signals.
Maximum Coverage Area: +16 dBm downlink power for 2X more coverage area than the closest competitor.
SureIQ™ Technology balances incoming signals, preventing shutdown and maximizing performance in strong signal environments.
Remote Monitoring: Fusion5X 2.0 is compatible with SureCall Sentry™ which allows users and installers to monitor the booster’s performance, set up alert notifications via the mobile app and adjust settings from anywhere, anytime.
24/7 Peak Performance: Auto-adjusting gain and SureIQ work together to ensure 24/7 uptime at peak performance.
- Works with all North American carriers
- Compatible with all cellular devices, including hotspots, while extending their battery life
- 5G Phone Compatible – Boosts voice and 4G LTE data signals on 5G phones and devices
- Multiple kitting options offer the flexibility to customize installation in any building or floor plan
- Industry best 3-year warranty and lifetime US-based tech support
KIT CONTENTS
SureCall Fusion5x 2.0 CA In-Building 5 Band Booster Kit. Includes Outside Yagi Antenna, Inside Ultra-Thin Dome Antenna, LMR400 100′ and 75′ Black Cables, Input 110 V AC, 60 Hz, Output DC 12 V Power Supply. Cover Up to 20,000 Square Feet.
Additional information
| Manufacturer |
|---|
Related products
SureCall Fusion5x 2.0 Yagi Panel
$1,499.99
Designed for mid-sized commercial buildings and large residences, Fusion5X 2.0™ increases voice, text and 4G LTE signals for all Canadian cell carriers and mobile devices. Configurable for all indoor environments, Fusion5X 2.0 reduces dropped & missed calls and improves 4G LTE data speeds to ensure everyone has a reliable connection to their mobile device.
Fusion5X 2.0 is the industry’s most powerful cellular signal booster in its class, covering up to 2X more area than the closest competitor. Its the chosen solution for mid- to large-size applications that need access to reliable voice, text, and data signals.
Maximum Coverage Area: +16 dBm downlink power for 2X more coverage area than the closest competitor.
SureIQ™ Technology balances incoming signals, preventing shutdown and maximizing performance in strong signal environments.
Remote Monitoring: Fusion5X 2.0 is compatible with SureCall Sentry™ which allows users and installers to monitor the booster’s performance, set up alert notifications via the app and adjust settings from anywhere, anytime.
24/7 Peak Performance: Auto-adjusting gain and SureIQ work together to ensure 24/7 uptime at peak performance.
- Boosts voice, text and 4G LTE signals for all Canadian cell carriers
- Reduces dropped & missed calls and extends battery life for all cellular devices
- Multiple kitting options offer the flexibility to customize installation in any building or floor plan
- Industry best 3-year warranty and lifetime US-based tech support
KIT CONTENTS
SureCall Fusion5x 2.0 CA In-Building 5 Band Booster Kit. Includes Outside Yagi Antenna, Inside Panel Antenna, LMR400 100′, 75′ & 20′ Black Cables, Input 110 V AC, 60 Hz, Output DC 12 V Power Supply. Cover Up to 20,000 Square Feet.
Description
Designed for mid-sized commercial buildings and large residences, Fusion5X 2.0™ increases voice, text and 4G LTE signals for all Canadian cell carriers and mobile devices. Configurable for all indoor environments, Fusion5X 2.0 reduces dropped & missed calls and improves 4G LTE data speeds to ensure everyone has a reliable connection to their mobile device.
Fusion5X 2.0 is the industry’s most powerful cellular signal booster in its class, covering up to 2X more area than the closest competitor. Its the chosen solution for mid- to large-size applications that need access to reliable voice, text, and data signals.
Maximum Coverage Area: +16 dBm downlink power for 2X more coverage area than the closest competitor.
SureIQ™ Technology balances incoming signals, preventing shutdown and maximizing performance in strong signal environments.
Remote Monitoring: Fusion5X 2.0 is compatible with SureCall Sentry™ which allows users and installers to monitor the booster’s performance, set up alert notifications via the app and adjust settings from anywhere, anytime.
24/7 Peak Performance: Auto-adjusting gain and SureIQ work together to ensure 24/7 uptime at peak performance.
- Boosts voice, text and 4G LTE signals for all Canadian cell carriers
- Reduces dropped & missed calls and extends battery life for all cellular devices
- Multiple kitting options offer the flexibility to customize installation in any building or floor plan
- Industry best 3-year warranty and lifetime US-based tech support
KIT CONTENTS
SureCall Fusion5x 2.0 CA In-Building 5 Band Booster Kit. Includes Outside Yagi Antenna, Inside Panel Antenna, LMR400 100′, 75′ & 20′ Black Cables, Input 110 V AC, 60 Hz, Output DC 12 V Power Supply. Cover Up to 20,000 Square Feet.
Additional information
| Manufacturer |
|---|
Related products
