$1,600.00

Stable, Flexible and High-Performing Repeater

Double Your Channel Capacity

IDAS doubles the capacity of the current 12.5kHz channel allocation. Icom allows you to meet any narrow banding requirements today, and provides a solution to any future spectrum deficiencies.

Digital/analog Mixed Mode Operation

The IC-FR5000 series can receive both analog and digital signals on a single channel. You can partially introduce the IDAS system, while using the existing analog radios in a system. The IDAS system allows you to scale migration to narrow band digital at your own pace and need.

Improved Audio Quality

The IDAS system occupies only 6.25kHz spacing per channel. With the improved sensitivity of narrow band communications, increased communication greater than 12.5kHz analog mode can be achieved. The IDAS system uses the AMBE+2â„¢ codec, which provides clear audio and simultaneous data communication.

  • Install two RF modules in one unit with optional UR-FR5000/UR-FR6000
  • IDAS digital mode built-in for future digital migration
  • 19-inch rack mount and 2U height low profile design
  • Detects multiple CTCSS and DTCS on a channel
  • Base station operation with 5 programmable buttons
  • 12-digit dot matrix display
  • 32 memory channels
  • Normal and priority scan setting
  • 50W output power (at 50% duty operation)
  • Built-in audio compander
  • Built-in inversion-type voice scrambler (UT-109R/UT-110R scrambler optional)

Description

Get product brochure and manual. Please fill in your information to gain access.



Network Interface*

The IDAS repeater has a network interface* and can be connected to a LAN or the Internet via Ethernet cable. Communication range is vastly extended by the Internet connection and eliminates the need for expensive leased lines. When connected to a PC via a LAN or the Internet, you can remotely maintain the repeater configuration remotely from your PC.
* Option (Available in the future)

Digital Trunking Capability*

The repeater will also have digital trunking capability in the near future. This will allow you further effective channel management by sharing a minimum of channels with a large number of users.
* Some features are planned and released in the future.

19-inch Rack Mount 2U Height Low Profile Design

The IC-FR5000 series uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.

Two RF channel modules in one unitTwo RF Channel Modules in One Unit

Two RF modules* can be installed in a chassis to reduce installation space, while the RF modules can be programmed and operated independently. LEDs on the front panel show both channel conditions.
* Optional UR-FR5000/UR-FR6000 required.

50W Output at 50% Duty Cycle,  25W 100% Duty Cycle Operation

Employing a high stability ±0.5ppm oscillator and high performance power amplifier, the IC-FR5000 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.

Multiple CTCSS, DTCS Tone and RAN Code Decode

The IC-FR5000 series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups and provides quiet stand-by while using other groups.

Superior Receiver Performance

The IC-FR5000 series has class leading receiver performance of selectivity and intermodulation rejection. It improves the quality of the repeater service even under congested band conditions.

D-SUB 25-pin Accessory Connector

The IC-FR5000 series has a programmable D-SUB 25-pin accessory connector for connecting various trunking controllers or external remote control devices. Also, modulation/ demodulation signals can be input/ output from the D-SUB connector.

Voice Scrambler

The built-in inversion type* voice scrambler provides secure conversation as stadard. When a more secure system is required, the 32 coded non-rolling type voice scrambler UT-109R* and 1020 code rolling type UT-110R* are available as an option. In IDAS digital mode, a 15-bit encryption key provides over 32,000 scrambling codes.
*These voice scramblers (inversion type, UT-109R and UT-110R) are available with analog mode only.

Built-in Audio Compander*

The built-in audio compander improves the signal to noise ratio and provide clear audio.
*Analog mode only.

Other Features

  • PTT priority setting (Local Mic., external PTT or repeater operation)
  • Built-in inversion type voice scrambler and optional voice scrambler UT-109R or UT-110R*
  • 5-Tone and DTMF encoder/decoder* and CW ID transmitter
  • Analog wide/narrow (12.5/25kHz) channel spacing programmable*
  • Normal and priority scan
  • Convenient key assign stickers supplied
  • Beat cancel capability
  • Low voltage alert*
  • Quick and easy programming from a PC
    * For analog mode only
[/fusion_builder_column][/fusion_builder_row][/fusion_builder_container]

Additional information

Manufacturer

Wi-Com’s Two-way Radio rental experts will collaborate with you to better understand your industry and business so we can create a custom plan designed to meet your specific business and financial objectives.

[hubspot type=form portal=5253669 id=6566f444-4525-4204-a3ba-4428d55e2ecb]