Cel-Fi QUATRA 1000/2000 Range Extender QRE Module
Cel-Fi QUATRA Range Extender is a Power over Ethernet (PoE) device that extends the maximum cable distance between the NU and the CU.- Extend 100 Meters with CAT5
- Extend 150 Meters with CAT6
-
-
Cel-Fi Quatra 1000
Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague occupants in middleprise buildings. Cel-Fi QUATRA is an Active DAS Hybrid that solves this problem. It is an affordable, all-digital solution. It provides uniform, high quality cellular signal throughout a building, and is scalable to the size needed. Cel-FI QUATRA is carrier approved and guaranteed network safe. Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger, utilizing CAT 5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. Cel-Fi QUATRA can be installed in just days (compared to months typical of other solutions), and at a price point that meets the middleprise budget.Smart Cellular Coverage
Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.- Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
- Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
- Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
- Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
- Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
- All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
- Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
- Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
- Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.
-
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
-
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
-
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
Please note that the Cel-Fi GO X can only boost signal for one network at a time. If you have users on multiple networks in your building, you may need a multi-carrier booster or multiple GO X devices.
-
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
Please note that the Cel-Fi GO X can only boost signal for one network at a time. If you have users on multiple networks in your building, you may need a multi-carrier booster or multiple GO X devices.
Cel-Fi WAVE Mobile App
The GO X can be easily optimized and monitored by the Cel-Fi WAVE application for iOS and Android devices. Cel-Fi’s mobile app allows you to connect to the device over bluetooth and see detailed diagnostic information, including measures of signal strength (RSRP), gain, and signal quality (SINR).
Coverage Area
As with all signal booster kits, the coverage area of the Cel-Fi unit depends on two factors:- The number of indoor antennas you pair it with
- The signal strength at the location where the outdoor “donor” antenna is installed.
-
The Cel-Fi GO X is an in-building signal booster system that utilizes Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage.
The GO X is different to the majority of other boosters we sell in 3 ways:
- The Go X is a single-carrier device, and will amplify signal for just one of the following carriers at a time: Telus, Bell or Rogers.
- The GO X offers up to 100 dB gain. Unlike most of our other broadband, multi-carrier devices, the Cel-Fi Go X is not restricted to 70 dB gain by the ISED.
- The Go X is NEMA 4 weather resistant, and can be installed outdoors.
The Go X can be used in all kinds of applications, including:
- Homes
- Businesses
- Retails
- Hospitals
- Warehouses
- Industrial facilities
- Outdoor applications
Please note that the Cel-Fi GO X can only boost signal for one network at a time. If you have users on multiple networks in your building, you may need a multi-carrier booster or multiple GO X devices.
Cel-Fi WAVE Mobile App
The GO X can be easily optimized and monitored by the Cel-Fi WAVE application for iOS and Android devices. Cel-Fi’s mobile app allows you to connect to the device over bluetooth and see detailed diagnostic information, including measures of signal strength (RSRP), gain, and signal quality (SINR).
Coverage Area
As with all signal booster kits, the coverage area of the Cel-Fi unit depends on two factors:- The number of indoor antennas you pair it with
- The signal strength at the location where the outdoor “donor” antenna is installed.
- Interface Systems and Sites
- Carrier-Grade Security
- Multiple Web API Options
- Network Safe
- Ruggedized NEMA 4 Rated
- Configurable for Up to 2 Cel-Fi GO Stationary Smart Signal Boosters
Benefits
- Remote Management: Users can access the Cel-Fi WAVE Portal remotely through a web interface.
- Performance Management: Easily control systems and ensure optimal performance.
- Remote Troubleshooting: Troubleshoot and support systems remotely using real-time data and performance metrics.
- WAVE Portal: Cel-Fi WAVE remote device and asset management enable data modeling, reporting, and globally trusted carrier-grade security.
- Web Based Applications: Easy to connect to other web-based services for a fully integrated and remotely managed site solution.
- Ease of Installation: Cel-Fi GO RMOE intelligently and automatically senses and adapts to its environment, including Operator network changes or those caused by other nearby Cel-Fi devices or boosters.
