Cel-Fi In-Building / IoT / Remote

Cel-Fi In-Building / IoT / Remote2021-11-24T20:01:40+00:00

Cel-Fi Indoor / Outdoor / Home / Office / Large Building

Nextivity Inc. develops the award-winning Cel-Fi products that optimize cellular coverage in enterprise, business, residential, and transportation applications. Cel-Fi products are self-configuring, carrier-approved, and unconditionally network safe; leveraging the IntelliBoost chipset to deliver the industry’s highest gain at the lowest cost per square foot. Cel-Fi is authorized by 200 carriers.

Unsure which booster is right for you? Unsure how to install your new cellular booster? We can help!

Service +Plus Installation for Boosters
Contact Us!

Cel-Fi QUATRA 1000 (CU) Coverage Unit 100dB Gain for Band 2/4/5/12

100dB Gain for Band 2/4/5/12

Cel-Fi Quatra 1000

Spotty cellular coverage, poor voice quality, dropped calls, and dead zones continue to plague occupants in middleprise buildings. Cel-Fi QUATRA is an Active DAS Hybrid that solves this problem. It is an affordable, all-digital solution. It provides uniform, high quality cellular signal throughout a building, and is scalable to the size needed. Cel-FI QUATRA is carrier approved and guaranteed network safe. Unlike older analog boosters and passive DAS technology, Cel-Fi QUATRA delivers a cellular signal that is up to 1000x stronger, utilizing CAT 5e cabling for RF and Power over Ethernet, with no signal attenuation right to the perimeter of the building. Cel-Fi QUATRA can be installed in just days (compared to months typical of other solutions), and at a price point that meets the middleprise budget.

Description

Smart Cellular Coverage

Cel-Fi QUATRA is an active DAS hybrid solution for delivering high quality in-building cellar coverage in middleprise venues. It combines the best of active DAS and the Cel-Fi technologies that have been widely adopted by carriers around the world. It operates in off-air mode or can be integrated with carrier small cell equipment and operated in distributed small cell mode, creating a Supercell. Cel-Fi QUATRA can be configured with components, for single or multi-carrier environments.

  • Highest Coverage Gain: With 1000x more gain than the competition, Cel-Fi QUATRA delivers a stronger signal and provides a larger coverage footprint in environments where the incoming signal is weak. This ensures the strongest possible signal is sent to the inside antennas.
  • Highest Downlink Power: With 4x more downlink power than the competition, QUATRA ensures the strongest signal is sent to inside antennas to provide the largest coverage footprint.
  • Highest Uplink Power: 2x more uplink power than the competition allows for a stronger signal transmission to the tower to maximize user capacity and increase the range from the cell site.
  • Multi-Carrier 3G / 4G / LTE Voice and Data: Cel-Fi is the only cellular coverage solution available with up to 100 dB off-air gain and single or multi-carrier support for 3G / 4G / LTE Voice and Data. Each Carrier has dedicated maximized gain enhancement; no sharing limited bandwidth between carriers.
  • Supercell Mode: QUATRA systems can be connected to a single small cell, or multiple small cells, to form a coordinated Supercell. Supercells provide uniform access to the capacity introduced by the small cell, and are preferred by carriers in densely populated and high traffic areas.
  • All Digital Cat5e PoE Solution: No need to deal with signal loss from coax, or the high costs of Fiber. Use existing dedicated Cat5e lines, or simply drop new ones without permits or difficult trenching. Cat5e is an easy to deploy, all digital solution that also delivers power from NU to CU.
  • Built for Installers: Cel-Fi QUATRA ships with installer tools that simplify the planning process, equipment selection, and antenna aiming to automate the hard math calculations of RF Planning and eliminate the complexity of specifying the system for the unique venue requirements.
  • Setup, Maintenance, and Remote Management: Cel-Fi provides the WAVE Portal application for easy setup, provisioning, and management via a Smart Phone or Cloud Portal, providing quick access to install and help your customers faster.
  • Network Safe and Carrier Approved: Cel-Fi products are built on an advanced Intelliboost technology to deliver the strongest possible signal when and where needed. As the environment changes, Cel-Fi changes with it, without shutdown or interruption. Cel-Fi has partnered with carriers around the world to distribute their signal at the safest and highest levels, guaranteeing consistent coverage.

 

Q1000Config_MIMO.png

Cel-Fi WAVE Portal

The Cel-Fi WAVE Platform enables device management and maintenance of Cel-Fi QUATRA systems. The Cel-Fi WAVE Platform mobile app facilitates ease of use on site. Alerts and alarms can be used as configured out of the box or they can be customized however the owner or admin chooses.  The Cel-Fi WAVE Platform is a cloud-based remote management platform that allows users/operators to manage multiple Cel-Fi QUATRA systems. Features of the platform include:
  • Cel-Fi device and asset management
  • Data modeling and reporting
  • Mobile and computer applications
  • Globally trusted carrier-grade security
  • Users can access the Cel-Fi WAVE Platform portal through the dashboard interface, or integrate it via APIs.
Request Portal Access: https://cel-fi.com/account-request/

 

alt

Additional information

Manufacturer

Cel-Fi GO XP with 1 Wideband Panel Antenna

$1,550.00

The Cel-Fi GO X Smart Signal Booster, the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO X leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO X is NEMA 4 rated weather resistant and does not interfere with other wireless devices.

This multi-carrier solution is ideal for use in commercial properties, government buildings, agricultural settings, small manufacturing operations, rural areas, businesses, and large homes.

Description

  • 3G / 4G / LTE Voice and Data
  • Up to 15,000 ft2 (1,500 m2) of Coverage
  • Multi-Carrier Support with Carrier Switching
  • Indoor / Outdoor NEMA 4 Rated
  • Network Safe
Up to 100 dB max gain      Indoor / outdoor protection     (NEMA 4 rated)
Multi-User

The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating, combined with an industrial design for harsh conditions, enables the device to support weather conditions that include water, dust, and dirt.

Sample Layouts

One Level                                                                                                Two Level                                                      Multi-Level

Cel-Fi GO X Bundles

Cel-Fi GO X bundles, with four different configurations, can be installed indoors or outdoors for 100 dB signal gain in areas up to 15,000 sq. ft. per system. The bundles include either Cel-Fi Omni Dome Antenna(s) for ceiling mount or Cel-Fi Wideband Panel Antenna(s) for wall mount, and include the Cel-Fi Wideband Directional Donor Antenna. Additional server antennas are available for venues with more floors or dense interior walls. For areas that suffer from extremely poor outdoor signal, the new high gain Cel-Fi LPDA Antenna is available.

The Cel-Fi GO X Bundles are ideal for:

  • Government buildings
  • Agricultural settings
  • Parking garages
  • Small manufacturing operations
  • Business in single/multi-level commercial properties
  • IoT and M-to-M applications
  • Remote or rural locations
  • Large homes

Cel-Fi GO X with 1 Wideband Panel Antenna

With 100 dB gain and coverage up to 10,000 ft2. This GO X bundle configuration is a single-level solution.

Bundle Includes:

 

Additional information

Manufacturer

Cel-Fi GO XD with 1 Wideband Ceiling Dome Antenna

$1,650.00

The Cel-Fi GO X Smart Signal Booster, the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO X leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO X is NEMA 4 rated weather resistant and does not interfere with other wireless devices.

This multi-carrier solution is ideal for use in commercial properties, government buildings, agricultural settings, small manufacturing operations, rural areas, businesses, and large homes.

Description

  • 3G / 4G / LTE Voice and Data
  • Up to 15,000 ft2 (1,500 m2) of Coverage
  • Multi-Carrier Support with Carrier Switching
  • Indoor / Outdoor NEMA 4 Rated
  • Network Safe
Up to 100 dB max gain      Indoor / outdoor protection     (NEMA 4 rated)
Multi-User

The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating, combined with an industrial design for harsh conditions, enables the device to support weather conditions that include water, dust, and dirt.

Sample Layouts

One Level                                                                                                Two Level                                                      Multi-Level

Cel-Fi GO X Bundles

Cel-Fi GO X bundles, with four different configurations, can be installed indoors or outdoors for 100 dB signal gain in areas up to 15,000 sq. ft. per system. The bundles include either Cel-Fi Omni Dome Antenna(s) for ceiling mount or Cel-Fi Wideband Panel Antenna(s) for wall mount, and include the Cel-Fi Wideband Directional Donor Antenna. Additional server antennas are available for venues with more floors or dense interior walls. For areas that suffer from extremely poor outdoor signal, the new high gain Cel-Fi LPDA Antenna is available.

The Cel-Fi GO X Bundles are ideal for:

  • Government buildings
  • Agricultural settings
  • Parking garages
  • Small manufacturing operations
  • Business in single/multi-level commercial properties
  • IoT and M-to-M applications
  • Remote or rural locations
  • Large homes

Kit Packages: 

1 Antenna:

  • 1x Wall Panel or Ceiling Dome Antenna
  • 1x Cel-Fi GO X Booster
  • 1x Cel-Fi GO X AC Power Supply
  • 1x Yagi Antenna
  • 1x Pipe Mount Bracket
  • 1x Lightening Sure Protector with 5ft Ground Wire
  • 1x 50ft FlexPro400 Coax Cable
  • 2x 2ft Booster Jumper Cable
  • 1x 30ft FlexPro400 Coax Cable

 

Additional information

Manufacturer

CF-PRO CELL-FI PRO

$1,199.00

Cel-Fi PRO improves 3G, 4G, and LTE cellular service by eliminating dead zones and dropped calls. With 100 dB of gain, Cel-Fi PRO will not only improve cellular service across four (4) concurrent bands, it will also reduce your cell phone’s power requirements and extend its battery life. Cel-Fi PRO covers up to 13,000 ft2 (1,200 m2) of indoor space per system. Cel-Fi PRO systems feature an LCD color interface, are fully self-contained and self-configuring, and require no external antennas or wiring. Simply plug it in to boost indoor cellular coverage.

Description

Cel-Fi PRO is CE and FCC approved. It has been approved by numerous mobile operators and regulatory bodies and is shipping globally.

Cel-Fi PRO EXA variants feature an external antenna connector to enable the use of an external Donor antenna. A Cel-Fi PRO EXA with an external Donor antenna can thereby acquire an outside signal, allowing it to be used in applications where no signal is present indoors (i.e. cement, metal walls, etc.). This opens up new opportunities for using Cel-Fi PRO Smart Boosters when other solutions fail. Cel-Fi PRO EXA enables cellular coverage in hard to reach places by allowing the Cel-Fi Network Unit to be placed, where no service exists.

Move the CU further away from the NU to maximize coverage.

The total coverage area equals twice the distance between the NU and the CU. The maximum distance is up to 100 dB path loss.

Get setup in 4 easy steps

1. Find the best cellular signal

Use your phone to find the best cellular signal. Typically you will get the best signal near a window.

2. Place the Network Unit

Place the Network Unit (NU) in the location where you get the best cellular signal.

3. Place the Coverage Unit

Place the Coverage Unit (CU) in the location where you need improved coverage.

4. Use app to optimize setup

Using the Cel-Fi WAVE app, finish setup and activation.

Sample Layouts

One Level                                                                                                                                                            Two Level

Antennas & Accessories

Cel-Fi PRO X

Cel-Fi PRO X is a cable adapter sleeve that allows the Cel-Fi PRO unit to link across greater distances or through (RF blocking) obstacles. The accessory works with any Cel-Fi PRO, in locations where the standard wireless UNII system link is challenged. The Cel-Fi PRO X connects the Cel-Fi PRO Network Unit to the Cel-Fi PRO Coverage Unit using a completely passively coupled sleeve, which uses the cable for communications.

Cel-Fi PRO X opens up new opportunities for using Cel-Fi PRO Smart Boosters, when other solutions fail. Cel-Fi PRO X enables cellular coverage to hard to reach places by allowing the Cel-Fi Coverage Unit to be placed much further from the Network Unit, or allowing the Units to connect when their normal RF link signals cannot penetrate through structures.

Additional information

Manufacturer

CFG0-M-RV CEL-FI GO RV

$999.00

Cel-Fi Go RV / Marine 65 dB Gain Mobile Wireless Booster (includes: Booster, 12V/24V DC/DC VPA, Trucker 5 dBi Antenna, Wall Panel 9 dBi Antenna, 25′ RG58 Cable with NMO-SMA Male, 20′ RG58 Cable with N Male-SMA Male & Mirror/Clamp-on Mount. Support Multiple Devices. Telus / Bell / Rogers Approve

Description

Cel-Fi GO M RV vehicle cell phone signal booster is for boosting reception of any single Canadian Carrier network (switchable) at one time such as Bell, Rogers, Telus, Sasktel or Freedom Mobile. It is suitable for using in vehicles including cars, trucks, SUVs, RVs and marine vessels. The Go-M uses Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage for 3G, 4G, and LTE.

This Cel-Fi GO M RV Bundle has the vehicle cell phone signal booster kit which comes with thread-mount exterior roof-mount antenna, 20 feet cable LMR-195 and connector SMA Male to SMA Female, and internal coverage antenna.

Nextivity Cel-Fi GO-RV Band 2/4/5/12/13MKit provides gain of 65 dB with Intelliboost technology. The GO RV can adjust to changing cellular network conditions automatically while you’re on the move. This unit also supports multiple devices.

As this version of the Cel-Fi GO M only boosts signals for any one carrier at a time, it is a good choice for one or more people on a single network such as Bell Mobility, Rogers Wireless, Telus Mobility, Sasktel or Freedom Mobile. However, if multiple people on multiple networks are using the vehicle, a simultaneous multi-carrier vehicle booster that works for all carriers at the same time may be a better option.

The NEMA 4 weather resistant rating means that the unit is protected against windblown dust and falling dirt, and water such as rain, snow, sleet and hose directed water. The unit will not be damaged if ice forms on the outside of the enclosure.

Cel-Fi WAVE Mobile App.

Cel-Fi WAVE smartphone app runs on the GO M and will help you get the best performance from it. That app is available for Android and iOS. It provides a User Interface to Cel-Fi systems. Application’s dashboard shows the system’s “Boost” value, allowing you to monitor the signal gain the GO M provides.

Benefits.

  • Mobile Coverage for cars, trucks, RVs, and boats.
  • Boosts 3G / 4G / LTE Voice and Data.
  • NEMA 4 Rating.
  • Multi-Carrier Support with Carrier Switching (one carrier coverage at a time).
  • App for Optimized Performance.
  • Network Safe.

Outside Antenna:

The RV 5 dBi antenna comes with NMO 17′ cable and mirror / clamp-on mount.

Cel-FI Mobile Mag. Mount Antenna is built to magnetically attach to cars, trucks, vans, SUVs, and RVs. The Cel-Fi Screw Mount Antenna has screw fixings.

Inside Antenna:

Cel-Fi Mobile Server Antenna is a cellular / LTE PANEL antenna. It has up to 9 dBi of gain. The antenna has a backside clip that can be mounted onto any RV wall.

Compatibility:

This signal amplifying unit will boost cell network of all Canadian Carriers including Bell Mobility, Rogers Wireless, Telus Mobility, Freedom Mobile, and Sasktel.

Installation.

Cel-Fi GO M can be installed by persons who are comfortable running cabling and doing simple car maintenance. You might however consider asking a friend, finding a local electronics installer/ handyman, or an auto repair/ detailing shop to install it for you. Are you installing in a vehicle that will stay stationary for a while, such as a recreational vehicle (RV)?

If you are not moving, you can switch the GO-M to stationary mode on the Cel-Fi WAVE app to use up to 100 dB of gain and coverage up to 12,000 sq ft. The coverage will depend on the antenna isolation, antenna choice, and mode it is set to. You can always use a panel antenna inside to direct the signal towards a specific direction to increase the coverage bubble or even use two antennas one inside and one outside when you are stationary.

The more separation between the antennas, the larger the coverage bubble.

Below is one example.​

Example of CelFi GoM Installed in RV

Please call us if you have any questions.

Specifications.

Supported Phones. Cell Phones, Hotspots, and any Device that uses Cellular Data.
Gain. 65 dB.
Impedance. 50 ohm.
Output power. Maximum UL power 20-22dBm EIRP, Maximum DL power 10dBm per 5 MHz EIRP.
Power supply. In-Car Charger Included.
Loss. 8 dB.
Connector type. SMA Female.

Additional information

Manufacturer

CFGO-M Cel-Fi GO Mobile

$880.00

Cel-Fi GO-M 65dB Gain Mobile Wireless Booster (includes: Booster, 12V/24V DC/DC VPA, Slim Low Profile Server Antenna w/12.5′ Cable & Magnet Antenna. Supports Multiple Devices and controlled through an app. Telus / Bell / Rogers Approved

Description

Cel-Fi GO M vehicle cell phone signal booster is for boosting reception of any single Canadian Carrier network (switchable) at one time such as Bell, Rogers, Telus, Sasktel or Freedom Mobile. It is suitable for using in vehicles including cars, trucks, SUVs, RVs and marine vessels. The Go-M uses Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage for 3G, 4G, and LTE.

This Cel-Fi GO M Vehicle Bundle has the vehicle cell phone signal booster kit which comes with magnet-mount exterior roof-mount antenna. Optional screw mount NMO antenna (part # A41-V36-100 / A41V36100 / 591NA41100C64V36 and kit UPC 697691004242), RV or Trucker antenna (A21-V31-100 / A2-V31100 / 591NA21260C64V31 and kit UPC 697691004259), and Marine antenna (part # A11-V37-100 / A11V37100 / 591NA11260C64V37, 30 feet cable part # GW195-360-SM-SF cable type LMR-195 and connector SMA Male to SMA Female, and kit) also available. See drop-down menu for options to buy this kit with respective optional antennas.

Nextivity Cel-Fi GO-M Band 2/4/5/12/13MKit provides gain of 65 dB with Intelliboost technology. The GO M can adjust to changing cellular network conditions automatically while you’re on the move. This unit also supports multiple devices. The Cel-Fi GO M for RV / Truckers bundle includes the Cel-Fi Trucker Antenna and Server Antenna, and is an ideal solution for cross country trucking or remote RV stays. The Cel-Fi GO M for Marine bundle includes the Cel-Fi Marine Antenna and Server Antenna, plus 30 ft. of cable. It is an ideal solution for near shore or water recreational, ferrying, or shipping vessels.

As this version of the Cel-Fi GO M only boosts signals for any one carrier at a time, it is a good choice for one or more people on a single network such as Bell Mobility, Rogers Wireless, Telus Mobility, Sasktel or Freedom Mobile. However, if multiple people on multiple networks are using the vehicle, a simultaneous multi-carrier vehicle booster that works for all carriers at the same time may be a better option.

The NEMA 4 weather resistant rating means that the unit is protected against windblown dust and falling dirt, and water such as rain, snow, sleet and hose directed water. The unit will not be damaged if ice forms on the outside of the enclosure.

Cel-Fi WAVE Mobile App.

Cel-Fi WAVE smartphone app runs on the GO M and will help you get the best performance from it. That app is available for Android and iOS. It provides a User Interface to Cel-Fi systems. Application’s dashboard shows the system’s “Boost” value, allowing you to monitor the signal gain the GO M provides.

Benefits.

  • Mobile Coverage for cars, trucks, RVs, and boats.
  • Boosts 3G / 4G / LTE Voice and Data.
  • NEMA 4 Rating.
  • Multi-Carrier Support with Carrier Switching (one carrier coverage at a time).
  • App for Optimized Performance.
  • Network Safe.

Outside Antenna:

Cel-Fi GO M offers a choice of two donor (outside) antenna options:

Both the Cel-Fi Mobile Magnetic Mount and Screw Mount Antennas are two of the best-performing antennas in their footprint on the market. They are outdoor wideband cellular omni-directional antennas with 2 to 4 Decibel Gain. Both feature weather resistant IP 67 plastic casing and have 3 meters (10 ft) of DACAR302 coaxial cable attached.

Cel-FI Mobile Mag. Mount Antenna is built to magnetically attach to cars, trucks, vans, SUVs, and RVs. The Cel-Fi Screw Mount Antenna has screw fixings.

Inside Antenna:

Cel-Fi Mobile Server Antenna is a cellular / LTE patch antenna. It has up to 2.5 dBi of gain. The antenna has an adhesive mount for ease of installation. It has 4 meters (13 ft) of RG-174 cable attached.

Compatibility:

This signal amplifying unit will boost cell network of all Canadian Carriers including Bell Mobility, Rogers Wireless, Telus Mobility, Freedom Mobile, and Sasktel.

Installation.

Cel-Fi GO M can be installed by persons who are comfortable running cabling and doing simple car maintenance. You might however consider asking a friend, finding a local electronics installer/ handyman, or an auto repair/ detailing shop to install it for you. Are you installing in a vehicle that will stay stationary for a while, such as a recreational vehicle (RV)?

If you are not moving, you can switch the GO-M to stationary mode on the Cel-Fi WAVE app to use up to 100 dB of gain and coverage up to 12,000 sq ft. The coverage will depend on the antenna isolation, antenna choice, and mode it is set to. You can always use a panel antenna inside to direct the signal towards a specific direction to increase the coverage bubble or even use two antennas one inside and one outside when you are stationary.

The more separation between the antennas, the larger the coverage bubble.

Below is one example.​

Example of CelFi GoM Installed in RV

Please call us if you have any questions.

Specifications.

Supported Phones. Cell Phones, Hotspots, and any Device that uses Cellular Data.
Gain. 65 dB.
Impedance. 50 ohm.
Output power. Maximum UL power 20-22dBm EIRP, Maximum DL power 10dBm per 5 MHz EIRP.
Power supply. In-Car Charger Included.
Loss. 8 dB.
Connector type. SMA Female.

Additional information

Manufacturer

CFG0-M-TKR CEL-FI GO TRUCKER

$999.00

Cel-Fi Go Trucker 65 dB Gain Mobile Wireless Booster (includes: Booster, 12V/24V DC/DC VPA, Slim Low Profile Server Antenna w/12.5′ Cable & Trucker 5 dBi Antenna,
NMO 17′ Cable & Mirror / Clamp-on Mount. Support Multiple Devices. Telus / Bell / Rogers Approved

Description

Cel-Fi GO M TKR vehicle cell phone signal booster is for boosting reception of any single Canadian Carrier network (switchable) at one time such as Bell, Rogers, Telus, Sasktel or Freedom Mobile. It is suitable for using in vehicles including cars, trucks, SUVs, RVs and marine vessels. The Go-M uses Nextivity’s Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage for 3G, 4G, and LTE.

This Cel-Fi GO M TRUCKER Bundle has the vehicle cell phone signal booster kit which comes with thread-mount exterior roof-mount antenna, 20 feet cable LMR-195 and connector SMA Male to SMA Female, and internal coverage antenna.

Nextivity Cel-Fi GO-TKR Band 2/4/5/12/13MKit provides gain of 65 dB with Intelliboost technology. The GO TKR can adjust to changing cellular network conditions automatically while you’re on the move. This unit also supports multiple devices.

As this version of the Cel-Fi GO M only boosts signals for any one carrier at a time, it is a good choice for one or more people on a single network such as Bell Mobility, Rogers Wireless, Telus Mobility, Sasktel or Freedom Mobile. However, if multiple people on multiple networks are using the vehicle, a simultaneous multi-carrier vehicle booster that works for all carriers at the same time may be a better option.

The NEMA 4 weather resistant rating means that the unit is protected against windblown dust and falling dirt, and water such as rain, snow, sleet and hose directed water. The unit will not be damaged if ice forms on the outside of the enclosure.

Cel-Fi WAVE Mobile App.

Cel-Fi WAVE smartphone app runs on the GO M and will help you get the best performance from it. That app is available for Android and iOS. It provides a User Interface to Cel-Fi systems. Application’s dashboard shows the system’s “Boost” value, allowing you to monitor the signal gain the GO M provides.

Benefits.

  • Mobile Coverage for cars, trucks, RVs, and boats.
  • Boosts 3G / 4G / LTE Voice and Data.
  • NEMA 4 Rating.
  • Multi-Carrier Support with Carrier Switching (one carrier coverage at a time).
  • App for Optimized Performance.
  • Network Safe.

Outside Antenna:

The trucker 5 dBi antenna comes with NMO 17′ cable and mirror / clamp-on mount.

Cel-FI Mobile Mag. Mount Antenna is built to magnetically attach to cars, trucks, vans, SUVs, and RVs. The Cel-Fi Screw Mount Antenna has screw fixings.

Inside Antenna:

Cel-Fi Mobile Server Antenna is a cellular / LTE patch antenna. It has up to 2.5 dBi of gain. The antenna has an adhesive mount for ease of installation. It has 4 meters (13 ft) of RG-174 cable attached.

Compatibility:

This signal amplifying unit will boost cell network of all Canadian Carriers including Bell Mobility, Rogers Wireless, Telus Mobility, Freedom Mobile, and Sasktel.

Installation.

Cel-Fi GO M can be installed by persons who are comfortable running cabling and doing simple car maintenance. You might however consider asking a friend, finding a local electronics installer/ handyman, or an auto repair/ detailing shop to install it for you. Are you installing in a vehicle that will stay stationary for a while, such as a recreational vehicle (RV)?

If you are not moving, you can switch the GO-M to stationary mode on the Cel-Fi WAVE app to use up to 100 dB of gain and coverage up to 12,000 sq ft. The coverage will depend on the antenna isolation, antenna choice, and mode it is set to. You can always use a panel antenna inside to direct the signal towards a specific direction to increase the coverage bubble or even use two antennas one inside and one outside when you are stationary.

The more separation between the antennas, the larger the coverage bubble.

Below is one example.​

Example of CelFi GoM Installed in RV

Please call us if you have any questions.

Specifications.

Supported Phones. Cell Phones, Hotspots, and any Device that uses Cellular Data.
Gain. 65 dB.
Impedance. 50 ohm.
Output power. Maximum UL power 20-22dBm EIRP, Maximum DL power 10dBm per 5 MHz EIRP.
Power supply. In-Car Charger Included.
Loss. 8 dB.
Connector type. SMA Female.

Additional information

Manufacturer

Cel-Fi Prime – Not available

Improve 3G and 4G LTE cellular service, eliminate dead zones, and dropped calls with Cel-Fi PRIME. With 80 dB of gain, Cel-Fi PRIME will not only improve cellular coverage, it will also reduce your cell phone’s power requirements and extend its battery life. PRIME offers plug-and-play cellular coverage for a room, storefront, kiosk, apartment or similar space, enabling clear and reliable connections within the coverage area – approximately 1,000 ft2 (100 m2). In an open space, the coverage bubble can be much larger.

Cel-Fi PRIME uses Nextivity’s patent-pending electrically steerable antenna technology, addressing pilot pollution issues, and ensuring PRIME outperforms the competition.
Cel-Fi PRIME is CE-certified, and available wherever Bands 1 (2100 MHz) and Band 3 (1800 MHz) are used.

Categories: , ,

Description

Improve 3G and 4G LTE cellular service, eliminate dead zones, and dropped calls with Cel-Fi PRIME. With 80 dB of gain, Cel-Fi PRIME will not only improve cellular coverage, it will also reduce your cell phone’s power requirements and extend its battery life. PRIME offers plug-and-play cellular coverage for a room, storefront, kiosk, apartment or similar space, enabling clear and reliable connections within the coverage area – approximately 1,000 ft2 (100 m2). In an open space, the coverage bubble can be much larger.

Cel-Fi PRIME uses Nextivity’s patent-pending electrically steerable antenna technology, addressing pilot pollution issues, and ensuring PRIME outperforms the competition.
Cel-Fi PRIME is CE-certified, and available wherever Bands 1 (2100 MHz) and Band 3 (1800 MHz) are used.

Designed to fit in, everywhere

Sample Layout

One Level

Cel-Fi Prime Data Sheet

Additional information

Manufacturer

Title

Go to Top